Cobalt(II) oxide is an inorganic compound that has been described as an olive-green[3] or gray[4] solid. It is used extensively in the ceramics industry as an additive to create blue-colored glazes and enamels, as well as in the chemical industry for producing cobalt(II) salts. A related material is cobalt(II,III) oxide, a black solid with the formula Co3O4.

Quick Facts Names, Identifiers ...
Cobalt(II) oxide
Thumb
Names
IUPAC name
Cobalt(II) oxide
Other names
Cobaltous oxide
Cobalt monoxide
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.013.777 Edit this at Wikidata
EC Number
  • 215-154-6
RTECS number
  • GG2800000
UNII
UN number 3288
  • InChI=1S/Co.O/q+2;-2 checkY
    Key: IUYLTEAJCNAMJK-UHFFFAOYSA-N checkY
  • InChI=1/Co.O/rCoO/c1-2
    Key: IVMYJDGYRUAWML-NNYFCMOLAO
  • InChI=1/Co.O/q+2;-2
    Key: IUYLTEAJCNAMJK-UHFFFAOYAY
  • [Co]=O
  • [Co+2].[O-2]
Properties
CoO
Molar mass 74.9326 g/mol
Appearance olive or gray powder
Odor odorless
Density 6.45 g/cm3 [1]
Melting point 1,933 °C (3,511 °F; 2,206 K)
insoluble in water[2]
+4900.0·10−6 cm3/mol
Structure
cubic, cF8
Fm3m, No. 225
Hazards
GHS labelling:
GHS07: Exclamation markGHS09: Environmental hazard
Warning
H302, H317, H410
P260, P280, P284, P301+P310+P330, P304+P340+P310, P342+P311, P403+P233
NFPA 704 (fire diamond)
ThumbHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 0: Will not burn. E.g. waterInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
3
0
0
Flash point Non-flammable
Lethal dose or concentration (LD, LC):
202 mg/kg
Safety data sheet (SDS) ICSC 1551
Related compounds
Other anions
Cobalt(II) sulfide
Cobalt(II) hydroxide
Other cations
Iron(II) oxide
Nickel(II) oxide
Related compounds
Cobalt(II,III) oxide
Cobalt(III) oxide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)
Close

Structure and properties

CoO crystals adopt the periclase (rock salt) structure with a lattice constant of 4.2615 Å.[5]

It is antiferromagnetic below 289 K.[6]

Preparation

Cobalt(II) oxide is prepared by oxidation of cobalt powder with air or by thermal decomposition of cobalt(II) nitrate or the carbonate.[3][4]

Cobalt(II,III) oxide decomposes to cobalt(II) oxide at 950 °C:[7]

2 Co3O4 → 6 CoO + O2

It may also be prepared by precipitating the hydroxide, followed by thermal dehydration:[citation needed]

CoX2 + 2 KOH → Co(OH)2 + 2 KX
Co(OH)2 → CoO + H2O

Reactions

As can be expected, cobalt(II) oxide reacts with mineral acids to form the corresponding cobalt salts:[citation needed]

CoO + 2 HX → CoX2 + H2O

Applications

Cobalt(II) oxide has for centuries been used as a coloring agent on kiln fired pottery. The additive provides a deep shade of blue named cobalt blue. The band gap (CoO) is around 2.4 eV.[citation needed] It also is used in cobalt blue glass.

See also

References

Wikiwand in your browser!

Seamless Wikipedia browsing. On steroids.

Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.

Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.