AI tools
Loading AI tools
For double-decker passenger trains and coaches, see Bilevel rail car.

Double-stack rail transport is a form of intermodal freight transport in which railroad cars carry two layers of intermodal containers. Invented in the United States in 1984, it is now being used for nearly seventy percent of United States intermodal shipments. Using double stack technology, a freight train of a given length can carry roughly twice as many containers, sharply reducing transport costs per container. On United States railroads special well cars are used for double-stack shipment to reduce the needed vertical clearance and to lower the center of gravity of a loaded car. In addition, the well car design reduces damage in transit and provides greater cargo security by cradling the lower containers so their doors cannot be opened. A succession of larger container sizes have been introduced to further increase shipping productivity in the United States.

A container train passing through Jacksonville, Florida, with 53 ft (16.15 m) containers used for shipments within North America

Double-stack rail operations are growing in other parts of the world, but are often constrained by clearance and other infrastructure limitations.

History

Southern Pacific Railroad (SP), and Robert Ingram, of SeaLand, debuted the double-stack intermodal car in 1977. SP and Ingram jointly designed the first car with ACF Industries in 1976.[1][2][3] At first it was slow to become an industry standard, then in 1984 American President Lines, started working with the Union Pacific Railroad and that same year, the first all double-stack train left Los Angeles, California for South Kearny, New Jersey, under the name of "Stacktrain" rail service. Along the way the train transferred from the UP to the Chicago and North Western Railway and then to Conrail.

Sizes and clearances

Thumb
AAR Plate-H loading gauge[4]

Double-stack cars come in a number of sizes, related to the standard sizes of the containers they are designed to carry. Well lengths of 12.19 m (40.0 ft), 14.63 m (48.0 ft) and 16.15 m (53.0 ft) are most common.[5] Heights range from 2.44 m (8 ft 0 in) to 2.908 m (9 ft 6+1⁄2 in) ("high cube").

Double stack requires a higher clearance above the tracks, or structure gauge, than do other forms of rail freight. Double-stack cars are most common in North America where intermodal traffic is heavy and electrification is less widespread; thus overhead clearances are typically more manageable. Nonetheless, North American railroads have invested large sums to raise bridges and tunnel clearances along their routes and remove other obstacles to allow greater use of double stack trains and to give them more direct routes. Outside North America some rail routes have been built or upgraded to such standards as to allow both electrification with overhead wires and double stacking.[6][7]

CSX lists three clearance heights above top of rail for double stack service:[8]

  • Doublestack 1 — 18 ft 2 in (5.54 m)[8]
  • Doublestack 2 — 19 ft 2 in (5.84 m)[8]
  • Doublestack 3 — 20 ft 2 in (6.15 m)[8]
  • Doublestack 4 — 20 ft 3 in (6.17 m)[9]

The last 2 clearances offer the most flexibility, allowing two high cube containers to be stacked.

Stacking containers

Thumb
Load bearing of container stacking is at the 40-foot coupling

Forty-foot containers are the standard unit length and load bearing points are at the ends of such containers. Longer containers, such as 45, 48 and 53 feet long, still have the load bearing points 40 feet apart, with the excess protruding equally outside this length. Therefore, 40-foot containers, or larger, can be stacked on 20-foot containers if there are two 20-foot containers in a row; however, 20-foot containers cannot be stacked on top of 40-foot or longer containers. The possible double-stacking patterns are:

  • Two 20 ft in lower and one 40 ft (or longer) in upper stack (allowed in India, China, US)
  • One 40 ft in lower and another 40 ft (or longer) in upper stack (allowed in India, US)
  • Two 20 ft in lower and another set of two 20 ft in upper stack.[10][failed verification]

The container coupling holes are all female and double male twistlocks are required to securely mate container stacks together.

Dwarf containers

China had started[when?] to experiment using reduced-size containers to be stacked on to normal containers to allow transport under 25 kV overhead line electrification.

India has started[when?] to build a series of dwarf container for domestic transport to be run under 25 kV electrification. With a height of 6 feet 4 inches (1,930 mm) they are 662 mm shorter than ISO shipping containers but 162 mm wider while still allowing for 67% more capacity when double stacked as compared to single stack ISO container.[11][failed verification] The width is comparable to that of North American 53-foot containers.

Weights

Containers have weight limits designed to allow their transport by road trucks, which have lower weight limits than trains. Outside the U.S., a common limit for railways is 8 tonnes per metre (8.1 short ton/yd; 7.2 long ton/yd) train length and 22.5 tonnes (22.1 long tons; 24.8 short tons) per axle. A four axle container car can take 90 tonnes (99.2 short tons; 88.6 long tons). Since a container is limited to 30.5 tonnes (33.6 short tons; 30.0 long tons), even including the empty weight of the rail car, single stacking uses only part of the load capacity of the railway. A 20-foot (6.1 m) container is limited to 24 tonnes (26.5 short tons; 23.6 long tons) and two such can fit into a car for a 40-foot (12.2 m) container, or even three if double-stacking[citation needed], but not four unless very high axle load is permitted. The North American railways permit two 53-foot (16.15 m) containers as shown in the images on this page.

Another consideration is the maximum weight of a train. A maximum length train in Europe, 750 m (2,461 ft) long can have 50 container cars with a total weight of 2,250 tonnes (2,480 short tons; 2,210 long tons), and more if 20 ft containers are included. This is not far from the limit using standard European (freight) couplers.[citation needed]

Operations

North America

Intermodal containers shipped by rail within North America are primarily 53 feet (16.15 m) long, with trailer-on-flat-car (TOFC) units used as well. The 53-foot length reflects a common maximum length for highway semi-trailers, which varies by state.[12] Major domestic intermodal carriers include:

Containers shipped between North America and other continents consist of mostly 40-foot (12.19 m) and some 45-foot (13.72 m) and 20-foot (6.10 m) containers. Container ships only take 40's, 20's and also 45's above deck. 90% of the containers that these ships carry are 40-footers and 90% of the world's freight moves on container ships; so 81% of the world's freight moves by 40-foot containers. Most of these 40-foot containers are owned by non-U.S. companies like Maersk, MSC, and CMA CGM. The only U.S. 40-foot container companies are leasing companies like Textainer, Triton International,[13] and CAI Leasing.[14]

Low bridges and narrow tunnels in various locations prevent the operation of double-stack trains until costly upgrades are made. Some Class I railroad companies in the U.S., often in partnership with government agencies, have implemented improvement programs to remove obstructions to double-stack trains. Double-stack projects include:

Outside North America

Thumb
Double stack train on the Panama Canal Railway

On the vast majority of its network, Europe has more restricted loading gauge and train weight limits as well as axle load limits. In other words, many bridges and tunnels are too low for double-stacking. In addition, since European electrification standards generally predated double stacking and were not designed to accommodate for larger clearances than those permitted by existing bridges and tunnels, the overhead catenary in Europe is also too low to accommodate double stacking. Only a few newly built routes make accommodation for possible double stacking in the future such as the Betuweroute in the Netherlands which however links to no other railway line allowing double stacking.

Standard gauge railways in North America and China must use special well cars to lower the center of gravity,[20] fit within the loading gauge and in China allow double stack trains to run under specially heightened overhead lines. 1,676 mm (5 ft 6 in) broad gauge used in India enables trains to carry standard shipping containers double-stacked on standard flat wagons. Flat wagons, in addition to being much less expensive than well wagons, can carry more containers in a given length of train.[21][22] Indian Railways is able to carry containers double-stacked on standard flat wagons at 100 km/h (62 mph). Experiments with triple-stacked operation using lower, 1,981 mm (6 ft 6 in) containers, were done unsuccessfully in 2006.[23] Experiments in India for double stacking using flatcars under 25 kV AC overhead lines set 7.45 m (24 ft 5+1⁄4 in) above rail have begun with funds given by Japan.[24][25][26]

See also

References

External links

Wikiwand in your browser!

Seamless Wikipedia browsing. On steroids.

Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.

Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.

Chrome
Wikiwand for Chrome
Edge
Wikiwand for Edge
Firefox
Wikiwand for Firefox