ISO 15398 - Wikiwand
For faster navigation, this Iframe is preloading the Wikiwand page for ISO 15398.

ISO 15398

From Wikipedia, the free encyclopedia

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article relies too much on references to primary sources. Please improve this by adding secondary or tertiary sources. (October 2013) (Learn how and when to remove this template message) The topic of this article may not meet Wikipedia's general notability guideline. Please help to establish notability by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be established, the article is likely to be merged, redirected, or deleted.Find sources: "ISO 15398" – news · newspapers · books · scholar · JSTOR (October 2013) (Learn how and when to remove this template message) (Learn how and when to remove this template message)

The ISO-standard ISO 15398 regulates the minimum requirements, proofs of suitability and auditing standards for manhole covers made of thermoplastics.

The complete title of the norm is Specification for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas. Issue date: 1. December 2012. The norm is in English.

The constraint "non-traffic areas" is also the crucial difference to the general European Standard for manhole covers EN124, which is only for vehicular access areas.

Plastic-manhole covers according to ISO 15398 are designated for the commitment on control- and inspection chambers in pedestrian (class A 15) and light vehicular areas (max. class B 125).

Moreover, only manhole covers made of thermoplastics and with a maximum of DN 600 are regulated.

The pressure-/load proofs of the EN 124:1994 are the foundation of the proofs of suitability, which the ISO 15398 pretends. Additional to this you have to render comprehensive material specific proofs - e.g. impact resistance, cold-climate-crack-test, UV-resistance of the introduced plastics. Also safety features like surface condition, skid resistance and the accuracy of fit are defined.

References

http://www.iso.org/iso/catalogue_detail.htm?csnumber=55427

{{bottomLinkPreText}} {{bottomLinkText}}
ISO 15398
Listen to this article