The New York Central Railroad (NYC) called the 4-8-2 type of steam locomotive the Mohawk type. It was known as the Mountain type on other roads, but the New York Central did not see the name as fitting on its famous Water Level Route. Instead, it picked the name of one of those rivers its rails followed, the Mohawk River, to name its newest type of locomotive. Despite the more common name, the 4-8-2 was actually suited in many ways more to flatland running than slow mountain slogging, with its 4-wheel leading truck for stability at speed. However, the L1s and L2s were unstable at higher speeds due to the lack of effective cross-balancing,[1] making the 4-wheel leading truck simply a better distributor of the locomotives weight; the L1s and L2s were consequently limited to 60 mph (97 km/h), though this issue was resolved for the L3s and L4s using data gathered from two experimental L-2s.
Quick Facts NYC Mohawk, Type and origin ...
NYC Mohawk |
---|
New York Central 3001 |
|
Specifications |
---|
Configuration:
| |
---|
• Whyte | 4-8-2 |
---|
Gauge | 1435 mm |
---|
Driver dia. | L-1/2/3 :69 in (1,752.60 mm) L-4 = 72 in (1,828.80 mm) |
---|
Wheelbase | 18 ft (L-4s and L-3s : 19) |
---|
Total weight | around 646.200 ibs |
---|
Boiler pressure | L-1 = 190 psi (1.31 MPa) - 200 psi (1.38 MPa) L-2 = 225 psi (1.55 MPa) L-3/4 = 250 psi (1.72 MPa) |
---|
Feedwater heater | Elesco = L1c L2a L3b |
---|
Valve gear | Baker |
---|
|
Performance figures |
---|
Maximum speed | L-1/L-2: 60 mph (97 km/h) L-3/L-4: 80 mph (129 km/h) |
---|
Power output | L-2d: 3,300 hp (2,500 kW) L-3a: 4,120 hp (3,070 kW) L-4a: 4,290 hp (3,200 kW) |
---|
Tractive effort | L-1 = 51,380 lbf (228.55 kN) L-1b 3 cylinder = 64,674 lbf (287.68 kN) L2 = 60,618 lbf (269.64 kN) L3/high speed L2d = 60,077 lbf (267.24 kN) L4 = 59,854 lbf (266.24 kN) |
---|
|
Career |
---|
Operators | New York Central |
---|
Retired | 1936-1957 |
---|
Preserved | Two (2933 and 3001) on static display |
---|
Disposition | Two preserved, remainder scrapped |
---|
|
Close
Indeed, the New York Central became the largest user of this wheel arrangement in North America, with 600 locomotives of this type built for its service; only the Pennsylvania Railroad came anywhere close, with 301 M1's of the type.
The Mohawk type was the pre-eminent freight power of the System, displacing the Mikado (2-8-2) type from first-line service. While other roads obtained much more massive freight power, Decapods (2-10-0s), Texas (2-10-4) types and a multitude of articulated designs, the New York Central, with its practically-gradeless high-speed raceways along the rivers, needed speed, not lugging ability.
The 600 Mohawks delivered were divided into four main classes, plus a few experimental and prototypes that were rebuilt between 1922 and 1939.