The Prussian Class S 3s were saturated steam locomotives developed by Hanomag for the Prussian state railways and were built from 1893.
Quick Facts Prussian S 3 DRG Class 13.0, Type and origin ...
Prussian S 3 DRG Class 13.0 |
---|
Prussian S3 photographed in 1895 at Berlin-Charlottenburg |
Type and origin |
---|
Builder | |
---|
Build date | 1893–1904 |
---|
Total produced | 1027 |
---|
|
Specifications |
---|
Configuration:
| |
---|
• Whyte | 4-4-0 |
---|
• German | S 24.16 |
---|
Gauge | 1,435 mm (4 ft 8+1⁄2 in) |
---|
Leading dia. | 1,000 mm (39+3⁄8 in) |
---|
Driver dia. | 1,980 mm (78 in) |
---|
Length:
| |
---|
• Over beams | 17,561 mm (57 ft 7+1⁄2 in) |
---|
Axle load | 15.6 t (15.4 long tons; 17.2 short tons) |
---|
Adhesive weight | 30.9 t (30.4 long tons; 34.1 short tons) |
---|
Service weight | 50.5 t (49.7 long tons; 55.7 short tons) |
---|
Water cap. | 15.0 m3 (530 cu ft) 16.0 m3 (570 cu ft) 20.0 m3 (710 cu ft) 21.5 m3 (760 cu ft) |
---|
Boiler pressure | 12 kgf/cm2 (1,180 kPa; 171 psi) |
---|
Heating surface: | |
---|
• Firebox | 2.32 m2 (25.0 sq ft) |
---|
• Evaporative | 117.70 m2 (1,266.9 sq ft) |
---|
Cylinders | Two, outside |
---|
High-pressure cylinder | 460 mm (18+1⁄8 in) |
---|
Low-pressure cylinder | 680 mm (26+3⁄4 in) |
---|
Piston stroke | 600 mm (23+5⁄8 in) |
---|
|
Performance figures |
---|
Maximum speed | 100 km/h (62 mph) |
---|
|
Career |
---|
Numbers | DRG 13 002–028 |
---|
Retired | 1927 |
---|
|
Close