The Victorian Railways Y class was a class of 0-6-0 steam locomotives.
Quick Facts Type and origin, Power type ...
Victorian Railways Y class |
---|
Y419 (Y112) and K153 at Newport Workshops in 2018 |
|
Specifications |
---|
Configuration:
| |
---|
• Whyte | 0-6-0 |
---|
Gauge | 1,600 mm (5 ft 3 in) |
---|
Driver dia. | 54 in (1,400 mm) |
---|
Length | 60 ft 5+1⁄2 in (18.43 m) |
---|
Axle load | 14.5 long tons (14.7 t; 16.2 short tons) |
---|
Adhesive weight | 57.35 long tons (58.27 t; 64.23 short tons) |
---|
Loco weight | 66.95 long tons (68.02 t; 74.98 short tons) |
---|
Tender weight | 45.8 long tons (46.5 t; 51.3 short tons) |
---|
Total weight | 112.75 long tons (114.56 t; 126.28 short tons) |
---|
Fuel type | Coal |
---|
Fuel capacity | 5 long tons (5.1 t) |
---|
Water cap. | 2,200 imp gal (10,000 L) |
---|
Cylinders | 2 |
---|
Cylinder size | 18 in × 26 in (457 mm × 660 mm) |
---|
|
Performance figures |
---|
Maximum speed | 40 mph (64 km/h) |
---|
Tractive effort | 21,840 lbf (97.1 kN) |
---|
|
Career |
---|
Operators | Victorian Railways |
---|
Number in class | 31 |
---|
Numbers | Original: 383–441, 445 (odd numbers) 1940 renumbering: 100–109, 111–112, 114–121 |
---|
Preserved | Y108, Y109, Y112 |
---|
Disposition | 3 preserved, 28 scrapped |
---|
|
Close
| This article needs additional citations for verification. (January 2017) |
The Y class was an example of the new policy of standard design principles being adopted by the railways of the time. The original pattern locomotive (an 0-6-0 tender engine) was built by Kitson & Co. at Leeds in England in 1885, and was exhibited, along with E426, in 1888 at the Melbourne Centennial Exhibition, held in the Melbourne Exhibition Building. The other 30 locomotives of this type were built by the Phoenix Foundry at Ballarat in 1888–1889. They were given road numbers 383 to 441 (odd numbers only), and the pattern engine 445, 443 having been allotted to an "Old" R class. They were big locomotives for their time—in fact the largest and most powerful 0-6-0s to run in Australia. The class excelled in their performance and acceptance by crews. They were often seen on suburban passenger trains prior to electrification, finishing their lives as yard shunters. Withdrawal of the Y class began in 1926, and only 20 were still in service when renumbered in 1940. The last in regular service was No. 108 which was withdrawn in 1963 after being a pilot engine at North Melbourne for many years.
Y109 (originally Y413) was taken off the register 23 December 1954 and frame and wheels sold to the Brunswick Plaster Mills Pty. Ltd, which rebuilt it into a diesel-mechanical locomotive, to work the Millewa South Railway from Nowingi to Raak Plain in north-western Victoria. It carried the number Y413 for some of the time it operated in that form.