Alcántara Bridge

For the bridge in Toledo, see Puente de Alcántara, Toledo.

The Alcántara Bridge (also known as Trajan's Bridge at Alcantara) is a Roman bridge at Alcántara, in Extremadura, Spain. Alcántara is from the Arabic word al-Qantarah (القنطرة) meaning "the arch". The stone arch bridge was built over the Tagus River between 104 and 106 AD by an order of the Roman emperor Trajan in 98.^[6]

Alcántara Bridge
Coordinates	39.7224°N 6.8924°W / 39.7224; -6.8924
Crosses	Tagus River
Locale	Alcántara, Spain
Heritage status	Listed as cultural heritage since 1921[1]
Characteristics
Design	Roman arch bridge
Material	Stone
Total length	181.7 m (596 ft)[2]
Width	8.6 m (28 ft)[2]
Height	45 m (148 ft)[3]
Longest span	28.8 m (94 ft)[4]
No. of spans	6
Load limit	52 t (57 short tons)[5]
History
Designer	Caius Julius Lacer
Construction start	104 AD
Construction end	106 AD
Location

History

Illustration in a Spanish magazine, 1857 (shows the then current state with gap)

Photo of the Alcantara bridge (c. 1870), by Jean Laurent, seen from the south

The Alcántara Bridge has suffered more damage from war than from the elements over the years. The Moors destroyed one of the smallest arches in 1214 although this was rebuilt centuries later, in 1543, with stone taken from the original quarries. The second arch on the northwest side was then later destroyed in 1760 by the Spanish to stop the Portuguese advancing and was repaired in 1762 by Charles III, only to be blown up again in 1809 by Wellington's forces attempting to stop the French. Temporary repairs were made in 1819, but much of the bridge was destroyed yet again in 1836 by the Carlists. The bridge was rebuilt in 1860 using mortared masonry.^[6] And following completion of the José María de Oriol Dam, which allowed for the draining of the Tagus riverbed, the main pillars were completely repaired in 1969.

The bridge originally measured 190 m (620 ft) in length, which today is reduced to 181.7 m (596 ft).^[2] The clear spans of the six arches from the right to the left riverside are 13.6 m (45 ft), 23.4 m (77 ft), 28.8 m (94 ft), 27.4 m (90 ft), 21.9 m (72 ft) and 13.8 m (45 ft).^[4]

Construction

The bridge's construction occurred in the ancient Roman province of Lusitania. In ancient Rome, the costs of building and repairing bridges, known as opus pontis ("bridge work"), were the responsibility of multiple local municipalities. Their shared costs prove Roman bridges belonged to the region overall, and not to any one town (or two, if on a border). The Alcántara Bridge was built at the expense of 12 local municipalities in Lusitania. The names were added on an inscription on the archway over the central pier.^[7]

Roman inscription on the archway^[6]

Original	Latin in full	Translation
Municipia provinciae Lusitaniae stip conlata quae opus pontis perfecerunt. Imp. Caesari divi Nervae f. Nervae. Traiano Aug. Germ. Dacico Ponti f. Max. Trib. potes VIII. imp. V. cos V. PP.	Municipia provinciae Lusitaniae stip conlata quae opus pontis perfecerunt. Imperatori Caesari divi Nervae filio, Nervae Traiano Germanico Dacico, Pontifici Maximo, Tribuniciae Potestati VIII, Imperatori V, Patri Patriae	The municipalities of the province of Lusitania contributed to the construction of the bridge. [Dedicated to] the Emperor Trajan, son of the deified Nerva, Conqueror of the Germans, Conqueror of the Dacians, the Chief High Priest, given Tribunician Power eight times, acclaimed Imperator five times, five times consul, Father of the Fatherland.

Roman inscription on the temple

Original	Translation
Pontem perpetui mansurum in saecula mundi fecit divina nobilis arte Lacer ...	The illustrious Lacer, with divine skill, made this bridge, which shall remain through the unending ages of the world [lit., through the ages of the unending world]

Gallery

• 
• 
• 
  Looking south, in the background the small temple with Lacer's grave
• 
  The entrance of the temple with the crypt of the Roman engineer

See also

• List of Roman bridges
• Roman temple of Alcántara
• Alcántara Dam