Aprilia SX 50

The Aprilia SX50 is a street motorcycle sold by Aprilia since 2006. It is powered by a D50B0 single-cylinder two-stroke engine with a nikasil-lined cast-iron cylinder manufactured by Derbi.

Aprilia SX 50

SX 50 with Polisport handguards
Manufacturer	Aprilia
Parent company	Piaggio
Production	Since 2006
Class	Supermotard
Engine	49.76 cc, 11.5:1 CR, liquid cooled, two stroke
Transmission	6-Speed Manual
Suspension	Ø40 mm hydraulic fork with leading axle; wheel travel 195 mm Rear: Hydraulic monoshock; Non-adjustable; wheel travel 180 mm
Brakes	Front: 300 mm stainless steel disc; floating quad-piston caliper Rear: 180 mm stainless steel disc; twin-piston caliper
Tires	Front: 2.50 X 17 Rear: 3.50 x 17
Wheelbase	55.354 in (1,406 mm)
Dimensions	L: 79.68 in (2,024 mm) W: 80.511 in (2,045 mm) H: 32.677 in (830 mm)
Fuel capacity	7 Litres
Related	Aprilia RX50, Aprilia MX50, Aprilia SX125

Engine

The Aprilia SX 50 engine is sourced from Derbi/Piaggio. This engine was used in the Derbi Senda DRD/X-Race/X-Treme supermotos, as well as the Derbi GPR 50 and Aprilia RS 50 road bikes. Engine parts from the bikes supermoto can be directly swapped with one another, there are some small differences between the road bike and supermoto engine which ceases the transfer of some external engine parts (exhaust, airbox).

References

• "SX 50 Technical sheet". Aprilia. Archived from the original on 3 May 2014. Retrieved 18 September 2018.