Top Qs
Timeline
Chat
Perspective

United States military beret flash

From Wikipedia, the free encyclopedia

United States military beret flash
Remove ads

In the United States (US) military, a beret flash is a shield-shaped embroidered cloth that is typically 2.25 in (5.72 cm) tall and 1.875 in (4.76 cm) wide with a semi–circular base that is attached to a stiffener backing of a military beret.[1][2][3] These flashes—a British English word for a colorful cloth patch attached to military headgear—are worn over the left eye with the excess cloth of the beret shaped, folded, and pulled over the right ear giving it a distinctive appearance.[1][2][4]

Wear of the beret flash in the US military
Thumb
Army NCOs wearing rifle–green berets with organizational beret flashes from (right to left) 1st and 3rd Special Forces Groups bearing the 1st Special Forces Regiment DUI
Thumb
An Army warrant officer wearing maroon beret with 1st Battalion, 160th Special Operations Aviation Regiment Beret Flash bearing polished metal Chief Warrant Officer Two rank insignia
Thumb
An Army officer wearing tan beret with 75th Ranger Regiment Beret Flash bearing polished metal lieutenant colonel rank insignia
Thumb
An Army officer wearing black beret with Department of the Army Beret Flash bearing polished medal Chaplain (Christianity) Branch Insignia
Thumb
An Air Force officer wearing navy-blue beret with Security Forces Officer Beret Flash bearing polished medal second lieutenant rank insignia
Thumb
An Air Force officer wearing black beret with TACP Beret Flash and Crest bearing miniature polished metal captain rank insignia
Thumb
An Air Force airman wearing gray beret with Combat Weather Team Beret Flash and Crest
Thumb
An Air Force officer and Army NCO wearing maroon berets with Joint Communications Support Element Beret Flash, the officer affixing his polished metal colonel rank insignia and the NCO her unit's DUI

Army soldiers and non-commissioned officers (NCOs) affix their distinctive unit insignia (DUI), regimental distinctive insignia (when no DUI is authorized), Sergeant Major of the Army collar insignia (when assigned), or Senior Enlisted Advisor to the Chairman of the Joint Chiefs of Staff collar insignia (when assigned) to the center of their beret flash.[1][5] Army warrant officers and commissioned officers affix their polished metal rank insignia to the center of their beret flash while general officer's may choose to affix regular or miniature polished metal rank insignia.[1] To better distinguish them from other Army personnel, Army chaplains affix their polished metal branch insignia to the center of their beret flash.[1] Air Force commissioned officers who are in the security forces or serving as weather parachutists wear their beret flash in the same manner as the Army while Tactical Air Control Party (TACP) officers attach a miniature version of their polished metal rank insignia below the TACP Crest on the TACP Beret Flash.[4][6] Air Force airmen and NCOs with the security forces only wear their unique beret flash while those assigned as weather parachutists or are TACPs wear their Army–style Combat Weather Team or TACP Beret Flash with a Combat Weather Team or TACP Crest, respectively.[4] Joint beret flashes—such as those worn by the Joint Communications Support Element—are worn by all who are assigned, given their uniform regulations allow, and will wear them in the manner prescribed by the joint unit.[7]

The design of all US Department of Defense (DoD) beret flashes are created and/or approved by The Institute of Heraldry (TIOH), within the US Department of the Army.[8] When a requesting organization is entitled to have its own beret flash, the institute will conduct research into the requesting organization's heraldry, as well as design suggestions from the requesting organization, in the creation of a unit or specialty beret flash.[9][10] Leveraging geometrical divisions, shapes, and colors a heraldic artist will create a design that will represent the history and mission of the requesting organization.[9][10] Once the organization agrees upon a design, the institute will authorize the creation of the new beret flash and will establish manufacturing instructions for the companies authorized to produce heraldic materials for the DoD.[9][10][11][12] The institute will also monitor the production of the new beret flash to ensure quality and accuracy of the design is maintained.[9][10][11]

Remove ads

History of the beret flash in the DoD

Summarize
Perspective

US Army

1940s

First beret flash of the US Army
Thumb
509th Parachute Infantry patch
Thumb
WWII British airborne beret awarded to a 509th paratrooper whose service number is on the beret liner, baring the 509th pocket patch as its beret flash with US Army parachutist badge.(c.1943)[13]

Throughout its history, Army units have adopted different headgear and headgear devices—such as various colored cords, colored stripes, and insignias—to identify specific units, the unique mission of a unit, and/or the unique role of a soldier.[3][14][15][16] According to some historians, the first US use of a military beret device was a beret flash created by the 509th Parachute Infantry Battalion of World War II (WWII).[2][13][17][18] The 509th trained with the British 1st Airborne Division and was made honorary members of the British airborne forces in 1943.[13][18][19] This honor authorized the 509th to wear the British paratrooper's maroon beret.[13][18][19] Some 509th paratroopers had a small hand–embroidered version of their battalion's pocket–patch created for use as their beret flash on their honorary berets.[2][17][13][18][20] The design of the 509th's WWII pocket–patch and beret flash depicts a stylized figure of a paratrooper standing at an open aircraft door wearing a reserve parachute with an artistic rendering of the number "509" surrounding the paratrooper's head and the name Geronimo displayed at the base of the door all embroidered in gold on a black shield-shaped cloth with a semi–circular top.[2][17][13][18][20]

1960s

Special forces group recognition bar example
Thumb
11th Special Forces Group Beret Flash
11th Special Forces Group Recognition Bar—note the similarity in design between the group's beret flash and recognition bar
Thumb
A medical corps paratrooper with the 11th Special Forces Group wearing rifle-green beret with 1st Special Forces Regiment DUI affixed above the 11th Special Forces Group recognition bar (c.1967)[21]

The official start of the Army's beret flashes began in 1961 with Department of the Army Message 578636 authorizing the establishment of organizational beret flashes for wear on the special forces' rifle–green beret.[2][22] Championed and heavily influenced by Lieutenant General William P. Yarborough (Ret.)—creator of the US Army parachutist badge, airborne background trimming, and established the term "beret flash" in US military lexicon—the message described the beret flash as shield–shaped with a semi–circular base made of felt 2 in (51 mm) tall and 1.625 in (41 mm) wide using solid colors to represent each of the special forces groups of the era.[2][22][23][24] The message also described who was authorized to wear the organizational beret flash stating that only special forces qualified paratroopers would be permitted to wear their special forces unit's organizational beret flash.[22] These organizational beret flashes were to be worn centered over the left eye with either the 1st Special Forces Regiment DUI, polished metal officer rank insignia, or chaplain branch insignia positioned below their parachutist badge and centered on the beret flash.[3][22] Later, the parachutist badge was removed and non–qualified soldiers assigned to a special forces unit wore a rectangular cloth beret flash, known as a recognition bar, 1.875 in (4.76 cm) long and 0.5 in (1.27 cm) wide color and pattern matched to their group's organizational beret flash.[3][25][26] The recognition bar was worn below their 1st Special Force Regiment DUI, polished metal officer rank insignia, or chaplain branch insignia on the rifle–green beret.[3][25]

1970s

Various beret accoutrements began to appear in the 1960s and 1970s, particularly between 1973 and 1979 when the Department of the Army had its morale–enhancing order in effect and different colored berets began to be worn by numerous units and branches of the Army.[27][28][29][30]

Historical photographs from the 1960s through the 1970s show soldiers assigned to reconnaissance, ranger, and armor units informally wearing black berets with various units affixing a wide variety of custom beret flashes that were worn over the left eye or left temple.[30] In 1975, the Army formally authorized its ranger units to wear the black beret.[31] If earned, some of these ranger units had their rangers affix their Ranger Tab to the top edge of their organizational beret flash along with their regiment or unit DUI, polished metal officer rank insignia, or chaplain branch insignia affixed to its center and worn over the left eye.[30][31][32]

Vietnam Era reconnaissance unit example
Thumb
2nd Battalion, 8th Cavalry, Recon. Platoon Beret Flash.
Thumb
An infantryman with 1st Cavalry Division, 1st Brigade, 2nd Battalion, 8th Cavalry, Reconnaissance Platoon wearing black beret with platoon beret flash (1970)[30]
Ranger unit example
Thumb
Ranger Department Beret Flash
Thumb
An infantry NCO with the US Army Infantry School wearing black beret with Ranger Department Beret Flash bearing 75th Ranger Regiment DUI below his Ranger Tab (c.1975)[33]

Wearing of the black beret by armor units expanded in the 1970s with some adopting organizational beret flashes.[28][29][30] For example, many US Army armor units stationed in West Germany, such as the 1st Armored Division, 2nd Armored Cavalry Regiment, and 11th Armored Cavalry Regiment, began wearing black berets in the 1970s with the armored cavalry regiments affixing maroon and white ovals for use as their beret flash.[28][29][30] The oval beret flash was worn vertically on the black beret behind their DUI to the left of their metal rank insignia or chaplain branch insignia and positioned over the left temple.[28][29][30][34] Another example is the Army's "triple capability" experiment with the 1st Cavalry Division that outfitted the division for armor, airmobile, and air cavalry warfare in 1971.[35][36] The division decided that its soldiers should wear different colored berets to represent the capability they brought to the division: black for armor, light–blue for infantry, red for artillery, and kelly–green for support—later settling for black berets across all formations.[30][35] As they became available, 1st Cavalry soldiers would affix a battalion or squadron specific organizational beret flash of various shapes, colors, and materials to their beret.[2][30] Historical photographs show many 1st Cavalry soldiers wearing their berets in the same manner as US armored cavalry soldiers in West Germany.[30][34] The use of black berets extended to training units as well, such as the US Army Training and Doctrine Command and its armor school.[28][29][30] Historical photographs of the era show plastic triangles being worn on black berets of US Army Armor School cadre and were worn in the same manner as beret flashes are today.[30]

Armored Cavalry Regiment example
Thumb
Armored Cavalry Oval Beret Flash
Thumb
An artillery NCO with the 11th Armored Cavalry Regiment wearing black beret with subdued sergeant rank insignia next to the Armored Cavalry Oval bearing his regiment's DUI (c.1973–1974)[29][30][37][38]
1st Cavalry Division example
Thumb
1st Battalion, 12th Cavalry Beret Flash
Thumb
An infantryman with the 1st Cavalry Division wearing black beret with polished brass specialist four rank insignia next to the 1st Battalion, 12th Cavalry Beret Flash bearing the 12th Cavalry Regiment DUI (1976)[39]
US Armor School example
Thumb
US Army Armor School Instructor Flash (made of plastic)
Thumb
An armor officer with the US Army Training and Doctrine Command, US Army Armor School wearing black beret with Armor School Instructor Flash bearing polished metal captain rank insignia (1976)[30]

In 1973, Army leaders authorized the wear of the maroon beret by airborne forces.[27][30] Within a year or so, paratroopers of the 82nd Airborne Division began incorporating organizational beret flashes onto their maroon berets pattered after their unit's airborne background trimming.[1][40][30] These organizational beret flashes, representing various units of the 82nd, were worn in the same manner as they are today.[1][40] Similarly, in 1974 Army leaders authorized the 101st Airborne Division to wear a dark–blue beret when it was reorganized into an air assault division at Fort Campbell.[15][28][30][41][42][43] Army articles and historical photographs of 101st soldiers show them wearing organizational beret flashes patterned after their unit's airborne background trimming and were affixed with either their polished metal rank insignia, DUI, or chaplain branch insignia centered on the beret flash and worn over the left eye.[1][15][30][41][43] Between 1976 and 1977, 101st soldiers would affix their Airmobile Badge—renamed Air Assault Badge in 1978—to their berets positioned over their left temple, next to their beret flash.[15][30][43][44] Other Fort Campbell units of the era also wore the dark–blue beret as well as red for headquarters command and light-green for military police, all with traditional organizational beret flashes that were worn in the same manner as they are today.[28][30]

82nd Airborne Division example
Thumb
1st Battalion, 508th Infantry Airborne Background Trimming
Thumb
1st Battalion, 508th Infantry Beret Flash
Thumb
A paratrooper with the 82nd Airborne Division wearing maroon beret with 1st Battalion, 508th Infantry Beret Flash bearing his regiment's DUI (1975)[40]note the design similarities between the airborne background trimming and beret flash
101st Airborne Division example
Thumb
326th Engineer Battalion Airborne Background Trimming
Thumb
326th Engineer Battalion Beret Flash
Thumb
An engineer officer with the 101st Airborne Division wearing dark–blue beret with 326th Engineer Battalion Beret Flash bearing polished metal lieutenant colonel rank insignia next to his Airmobile Badge (1977)[30]note the design similarities between the airborne background trimming and beret flash
Arctic–qualified soldier example
Thumb
1st Battalion, 60th Infantry Beret Flash
Thumb
An arctic–qualified infantryman with the 172nd Infantry Brigade wearing olive–drab beret with 1st Battalion, 60th Infantry Regiment Beret Flash bearing his regiment's DUI (c.1970s)[30][45]

Also during the 1970s, arctic–qualified soldiers of the 172nd Infantry Brigade wore locally authorized olive–drab berets with organizational beret flashes that were unique to each battalion, company, troop, or battery of the brigade and were worn in the same manner as they are today.[1][29][30][45]

By 1979, the Army put a stop to the use of berets by conventional forces, leaving only special forces and ranger units the authority to wear berets.[28][29][30]

1980s

In 1980, the Army reversed part of its decision allowing airborne units to wear maroon berets, ranger units black berets and special forces units rifle–green berets.[28][29][46] The Army's 1981 uniform regulation describes the wear of these berets with the only authorized accoutrements being organizational beret flashes or recognition bars with officer rank insignia, chaplain branch insignia, or DUI affixed.[3][47]

The organizational beret flash did not become the norm across the Army until 1984 when the recognition bar was discontinued after the Special Forces Tab became authorized for wear by special forces qualified soldiers.[25] Today, all paratroopers assigned to a special forces unit wear their unit's organizational beret flash on either a rifle–green beret, for special forces qualified paratroopers, or a maroon beret, for support paratroopers.[1][48]

Example of modern-day wear of special forces organizational beret flashes
Thumb
7th Special Forces Group Beret Flash
Thumb
Two officers, one wearing a maroon beret and the other a rifle-green beret, with 7th Special Forces Group Beret Flash and polished metal major rank insignia affixed; the special forces qualified officer is identified by his rifle-green beret and tab (2017)[1][48]

2000–present

In 2000, the Chief of Staff of the Army, General Eric Shinseki, decided to make the black beret the standard headgear of the Army.[29] This was codified in regulations in 2001 but was amended in 2011 making the Army black beret optional headgear with certain uniforms.[1][46][49] Due to this change, the 75th Ranger Regiment was authorized to switch from black to tan berets in 2001, given the black beret was no longer a distinctive uniform item for the Rangers.[29][46] General Shinseki also decided that a new Department of the Army Beret Flash be worn on the Army black beret.[8][29][50] According to TIOH, the Department of the Army Beret Flash is designed to resemble the flag of the Commander-in-Chief of the Continental Army, General George Washington, that was flown at the siege of Yorktown during the American Revolutionary War.[29][51][52][53] According to Department of the Army Pamphlet 670–1, the Department of the Army Beret Flash is to be worn by all units "unless authorization for another flash was granted before implementing the Army black beret as a standard Army headgear."[1][9]

Department of the Army Beret Flash
Thumb
Photograph of General Washington's Sun faded Commander–in–Chief flag (c.1775-1783)[51]
Thumb
Department of the Army Beret Flash
Thumb
A soldier with 1st Battalion, 23rd Infantry Regiment wearing Army black beret with Department of the Army Beret Flash and his regiment's DUI affixed during an Army Beret Donning Ceremony at Fort Lewis (c.2001)[46][54]
Example of the beret flash exception on the Army black beret
Thumb
55th Signal Company Beret Flash
Thumb
Signal Corps NCOs wearing maroon and black berets with 55th Signal Company Beret Flash and 114th Signal Battalion DUI—only the 55th's Airborne Combat Camera Documentation Team is authorized to wear the maroon beret but the beret flash was authorized for the company prior to the establishment of the Department of the Army Beret Flash (2012)[1][55]
First organizational beret flash authorized for a non–airborne unit since 1979[1][9][29]
Thumb
1st SFAB Beret Flash
Thumb
A soldier with 1st SFAB wearing brown beret with unit beret flash and DUI affixed (2018)[56]

Army units can request an organizational beret flash for their unit from TIOH given it is not for wear on the Army black beret.[1][9][57] A good example of this is TIOH's 2018 authorization of organizational beret flashes for the Security Force Assistance Command and its brigades (SFABs) for wear on their brown beret.[56][58]

In 2024, soldiers with the 101st Airborne Division began wearing their unit's historical organizational beret flashes from the 1970s, as well as new beret flashes patterned after their battalion's airborne background trimming, on the Army black beret.[2][41][59][60] Although no authorization for wear of new organizational beret flashes by air assault units has been identified, soldiers of the 101st wore them in full view of senior leaders, including the President of the United States, during official ceremonies starting in 2024.[8][9][59][60][61][62]

New and historical beret flashes being worn by various battalions of the 101st Airborne Division
Thumb
Some soldiers from the 101st Airborne Division wearing organizational beret flashes on the Army black beret—left-to-right: 1st Battalion, 187th Infantry Regiment; 1st Battalion, 26th Infantry Regiment; 1st Battalion, 320th Field Artillery Regiment (FAR) (2nd row); 1st Battalion, 502nd Infantry Regiment (3rd row); and 2nd Battalion, 502nd Infantry Regiment (front-right)—(2025)[2][41][60]
Thumb
1st Battalion, 187th Infantry Regiment Beret Flash (new)
Thumb
1st Battalion, 26th Infantry Regiment Beret Flash (new)
Thumb
1st Battalion, 320th FAR Beret Flash (repurposed from 1-319th FAR)
Thumb
1st Battalion, 502nd Infantry Regiment Beret Flash (historical)
Thumb
2nd Battalion, 502nd Infantry Regiment Beret Flash (historical)
Example of the Special Forces Beret Flash
Thumb
Special Forces (generic) Beret Flash
Thumb
A special forces qualified officer wearing rifle–green beret with a generic (non–unit specific) Special Forces Beret Flash and polished metal general rank insignia affixed (2019)[63]

In the 21st century, Army organizational beret flashes signify a specific formation of a specialized unit, such as an airborne, air assault, ranger, special forces, or combat advisor unit with some historical airborne units still authorized to wear their unit's beret flash.[1][16][27][55][58][60] However, there is a generic Special Forces Beret Flash worn on the rifle–green beret when a special forces paratrooper is assigned to a special forces position in a unit not authorized an organizational beret flash.[1] This beret flash is often worn by special forces qualified paratroopers regardless of their status or position due to the rifle-green beret informally representing a soldier's special forces qualification rather than a special forces unit as it did in the 60s, 70s, and 80s.[25][63]

US Air Force

Weather Parachutists

First beret flash of the US Air Force
Thumb
Vietnam Era Combat Weather Team Beret Flash
Thumb
Photograph of Vietnam Era Combat Weather Team beret with beret flash[64]

In the mid 1960s, Air Force commando weathermen,[65] formally known as weather parachutists, with Detachment 26 of the 30th Weather Squadron and Detachment 32 of the 5th Weather Squadron informally wore black berets.[64] A black cloth rectangle with a yellow embroidered anemometer surmounted by a fleur–de–lis with the words "Combat Weather" split by the anemometer was used as their beret flash.[64]

5th Weather Squadron insignia and beret
Thumb
Thumb
Thumb
The 5th Weather Squadron Emblem (left), Beret Flash (center), and beret with beret flash and master parachutist badge affixed (right)—note the alchemical symbol for water with representative colors green (Earth), blue (air), and red (fire)[64]

From 1970 through the 1980s, weather parachutists with the 5th Weather Squadron wore maroon berets with an Army style beret flash that incorporated the squadron's design and colors from their emblem's alchemical symbol for water and affixed their parachutist badge to the flash.[9][64]

In 1979, weather parachutists were authorized to wear navy–blue berets with an Army style beret flash consisting of a blue and black field surrounded by yellow piping.[9][64] Enlisted and NCOs affixed their parachutist badge to the flash while officers affixed their polished metal rank insignia.[64] In 1986, the gray beret was authorized for wear by weather parachutists who continued to wear the aforementioned cloth beret flash until a new large color metallic Special Operations Weather Team Crest was authorized.[64]

In 1992, the Air Force approved the return of the weather parachutist's blue, black, and yellow beret flash from the late 1970s and affixed their large color metal Special Operations Weather Team Crest to it.[64]

Special Operations Weather Team example
Thumb
Special Operations Weather Team Beret Flash
Thumb
A weather parachutist with AFSOC's 107th Weather Flight wearing gray beret with Special Operations Weather Team Beret Flash and Combat Weather Team Crest (2008)[66]

In 1996, weather parachutists assigned to Air Force Special Operations Command (AFSOC) began wearing a new Army style beret flash, known as the Special Operations Weather Team Beret Flash, while those assigned to Air Combat Command, known as combat weather teams, continued to wear the blue, black and yellow beret flash.[9][64][67] The Special Operations Weather Team Beret Flash consisted of a red border representing the blood shed by their predecessors, a black background representing special operations, and three diagonal lines of various colors representing the services they supported (green=Army, purple=joint forces, and blue=Air Force).[64] Officers affixed their polished metal rank insignia while enlisted and NCOs affixed their parachutist badge to the Special Operations Weather Team Beret Flash until 2002 when the Combat Weather Team Crest was created.[64] The Combat Weather Team Crest was affixed to both Special Operations Weather Team and Combat Weather Team Beret Flashes by enlisted and NCOs while officers continued to affix their polished metal rank insignia.[6][64][66][68]

In 2007/2008, the Special Operations Weather Team Beret Flash stopped being worn by AFSOC weather parachutists while the Combat Weather Team Beret Flash continues to be worn by combat weather teams to this day.[4][6][69]

Security Forces

1041st Security Police Squadron example
Thumb
1041st Security Police Squadron Beret Flash
Thumb
A security policeman with the 1041st Security Police Squadron wearing dark–blue beret and unit beret flash (c.1967)[70]

In 1966/67, the newly formed 1041st Security Police Squadron was authorized to wear a dark–blue beret with a unique organizational beret flash.[70][71][72] The 1041st's beret flash has a depiction of a white falcon carrying a pair of lightning bolts on a rounded inverted light–blue cloth triangle that was worn over the left temple.[70][71][72]

Security Forces example
Thumb
Security Forces Beret Flash
Thumb
A security forces airman with the 55th Security Forces Squadron wearing navy–blue beret with Security Forces Beret Flash (1998)[73]

In 1997, the Air Force stood up the security forces Air Force Specialty Code (AFSC), combining Air Force police and security forces into one carrier field, and honored the heraldry of the 1041st Security Police Squadron by creating a new organizational beret flash for all security forces airman and NCOs for wear on their dark-blue beret.[4][71] The new Security Forces Beret Flash depicts the 1041st's falcon over an airfield on a dark–blue shield–shaped patch bordered in gold with a white scroll at its base embroidered with the motto "Defensor Fortis" (defenders of the force) in dark–blue title case.[4][71] Security forces officers wear the same basic beret flash minus the embroidered falcon and airfield and in its place they affix their polished metal rank insignia.[4]

TACP

Air Mobility Liaison Officer example
Thumb
TIOH's manufacturing instructions
Thumb
An Air Mobility Liaison Officer with the 8th Air Support Operations Squadron wearing black beret with Air Mobility Liaison Officer Beret Flash and polished metal captain rank insignia affixed (2011)[74]

In 1979, TACP airman and NCOs were given authorization to wear the black beret. In 1984, two TACP's submitted a design for a unique beret flash and crest for wear on their berets which the Air Force approved one year later.[28] The TACP Beret Flash consists of a scarlet border that represent the firepower TACP's bring to bear with two dovetailed fields of blue and green representing the close working relationship between the Air Force and the Army that is enabled by the TACP.[75] TACP officers also wear the TACP Beret Flash and Crest but with miniature polished metal rank insignia below the crest.[4][76][77]

Air liaison officers assigned to an air support operations squadron or group can also be given authorization to wear the black beret and TACP Beret Flash with full-size polished metal officer rank insignia (no crest).[4][28][78][79]

Some Air Mobility Liaison Officers also wore the black beret.[28] Although worn informally, in 2015 TIOH authorized a slight modification of the TACP Beret Flash for wear by Air Mobility Liaison Officers, incorporating an embroidered compass rose in the upper–left corner of the flash.[74][80] The Air Mobility Liaison Officer Beret Flash was worn in the same manner as Air Liaison Officers wear the TACP Beret Flash.[74][81]

Combat Aviation Advisors

Combat Aviation Advisor example
Thumb
Combat Aviation Advisor Flash
Thumb
An NCO (left) and an officer (right) with a combat aviation advisor squadron are wearing brown berets with Combat Aviation Advisor Beret Flash with the officer affixing his metal major rank insignia (2018)[82]

From 2018–2022, AFSOC authorized the wear of a dark brown beret for airman, NCOs, and officers assigned to combat aviation advisor squadrons, such as the 6th and 711th Special Operations Squadrons.[82][83] The dark brown beret was worn with an Army style organizational beret flash consisting of a blue field with olive–green diagonal stripes and border.[9][82] The Combat Aviation Advisor Beret Flash was worn centered over the left eye with polished metal officer rank insignia, chaplain branch insignia, or an AFSC metallic beret crest while all other advisors wore it without accoutrements.[82][84]

US Navy

In the 1960s, select US Navy riverine patrol units operating in South Vietnam adopted the black beret to be part of their daily uniform and wore various accouterments on their berets.[85][86] In 1967, the Commander of the Riverine Patrol Force sent an official message to the Commander of River Patrol Flotilla Five authorizing the wear of the black beret.[86] In this message, the wear and appearance of the beret was defined stating, "Beret will be worn with river patrol force insignia centered on right side" and "Only standard size river patrol force insignia will be worn on beret. ... No other emblem or rank insignia will be displayed on beret."[86][87] Today, these US Navy small boat units honor their heritage by wearing the black beret during special occasions—such as induction ceremonies into the Gamewardens Association[88]—and will affix historically relevant riverine task force insignia for use as their beret flash.[89][90][91][92]

Examples of US Navy riverine units' use of the black beret
Thumb
Riverine Patrol Force, Task Force 116 Insignia
Thumb
Chief of Naval Operations (left) and Commander, Riverine Patrol Force (right) wearing black berets with Task Force 116 Insignia (1969)[93]
Thumb
A Navy NCO from Riverine Squadron 1 receives the black beret with Task Force 116 Insignia at a ceremony making him an honorary "Gamewarden" (2011)[90]
Remove ads

Beret flashes of the US military (1973–present)

Summarize
Perspective

Air Force

Obsolete

Army

Adjutant general

Obsolete

Air defense artillery

Obsolete

Armor and cavalry

Obsolete

Aviation

Obsolete

Chemical

Obsolete

Civil affairs

Obsolete

Engineers

Obsolete

Field artillery

Obsolete

Infantry

Obsolete

Logistics

Obsolete

Medical

information Beret flashes in this section may be obsolete.
Obsolete

Military intelligence

Obsolete

Military police

Obsolete

Multidisciplinary units

Obsolete

Ordnance

Psychological operations

Obsolete

Public affairs

Obsolete

Signal

Obsolete

Special forces

Obsolete

Training

Obsolete

Joint

Obsolete

State defense forces

Thumb
Thumb
A Texas State Guard officer wearing an Army blue service uniform with Texas State Guard Beret Flash and brigadier general rank insignia affixed (2010)[94]
Thumb
A Georgia State Defense Force chaplain wearing an Army combat uniform with State Defense Force Beret Flash and Chaplain (Judaism) Branch Insignia (2011)

The US state defense forces—also known as state guard, state military reserve, or state militia—in many US states and territories wear modified versions of US military uniforms.[8][95][96] To help separate state guard units from US military units, such as the Army National Guard, they will wear unique name tape, badges, shoulder sleeve insignia, and/or headgear.[96] If the militia unit chooses to wear a military beret, a unique organizational beret flash is worn to help distinguish them from Army or Air Force formations.[8][96][97][98][99][100][101] These state military reserve organizational beret flashes are worn in the same manner as today's Army or Air Force beret flashes.[96][97][98][99][100][101] The following is a list of some organizational beret flashes worn by various state and territory militias:

State/Territory specific beret flashes

Obsolete
information Beret flashes in this section are difficult to verify.
Remove ads

See also

References

Loading related searches...

Wikiwand - on

Seamless Wikipedia browsing. On steroids.

Remove ads