British 18-inch torpedo
British weapon used by ships, submarines, and aircraft From Wikipedia, the free encyclopedia
There have been a number of 18-inch (45cm) torpedoes in service with the Royal Navy of the United Kingdom.
These have been used on ships of the Royal Navy and aircraft of both the Fleet Air Arm and Royal Air Force, while Royal Navy surface ships and submarines use 21-inch torpedoes.
The British 18-inch torpedoes were 17.72 inches (45.0 cm) in diameter, beginning with the "Fiume" Whitehead torpedo of 1890.
Fiume Mark I
Summarize
Perspective
Purchased from Whitehead with the first delivery in 1890, and a second delivery in 1891. The weapon utilized compressed air propulsion, and was prolific for its time, having been exported to multiple other navies across the world.[1] The decision to adopt the 18-inch torpedo caliber was made by the Admiralty in 1889, with the Fiume Mark I being the first weapon of the type, soon thereafter followed by the RGF Mark I.[2]
In 1890, Whitehead established a torpedo factory in Weymouth, chiefly for the export market - but also in order to directly supply the Royal Navy with locally-manufactured weapons.[3] The factory initially manufactured various Fiume torpedoes, up to Mark III.
Fiume Mark I Short
- Entered service: 1890
- Weight: 845 lb (383 kg)
- Length: 11 ft 8 in (3.56 m)
- Explosive charge: 118.5 lb (53.8 kg) Wet guncotton
- Range and speed: 800 yd (730 m) at 26 kn (48 km/h)
Fiume Mark I Long
- Evaluation date: 1889
- Weight: 1,140 lb (520 kg)
- Length: 16 ft 5 in (5.00 m)
- Explosive charge: 201 lb (91 kg) Wet guncotton
- Range and speed: 400 yd (370 m) at 32 kn (59 km/h), 800 yd (730 m) at 20 kn (37 km/h)
- Notes: Not adopted for service; acquired for testing only. Related to the Japanese Type 30.
Fiume Mark II
Summarize
Perspective
Purchased from Whitehead. Compressed air propulsion. The Fiume Mark II was requested by the Royal Navy Admiralty as it became available in 1893, with the condition that the weapon's top speed would be increased up to 28 knots. Whitehead resisted, but accepted with the stipulation that their upcoming Fiume Mark III would also be purchased. The torpedoes were delivered in 1894. In 1896, the Mark II was adjusted for slightly greater speed. In 1902, the Mark II* was produced, with improvements to its speed, reliability, and a less expensive steel afterbody.
Fiume Mark II
- Entered service: 1894
- Weight: 1,151 lb (522 kg)
- Length: 16 ft 8 in (5.08 m)
- Explosive charge: 229 lb (104 kg) Wet guncotton
- Range and speed: 600 yd (550 m) at 28.75 kn (53.25 km/h), 800 yd (730 m) at 27.75 kn (51.39 km/h), 1,000 yd (910 m) at 23.75 kn (43.99 km/h)
Fiume Mark II*
- Entered service: 1902
- Weight: 1,200 lb (540 kg) (approximate)
- Length: 16 ft 8 in (5.08 m)
- Explosive charge: 229 lb (104 kg) Wet guncotton
- Range and speed: 1,000 yd (910 m) at 28 kn (52 km/h), 3,000 yd (2,700 m) at 15 kn (28 km/h) (approximate)
- Notes: Steel afterbody and improvements to valves and depth-keeping. Performance figures retrieved from the Japanese Type 32.
Fiume Mark III
Summarize
Perspective
Purchased from Whitehead, the final generation of Whitehead torpedoes designed at the facility in Fiume which were purchased by the Royal Navy. Developed in 1903, in production in 1904. Compressed air propulsion, progressively converted to dry heater propulsion beginning in 1909. The Fiume Mark III was the most prolific variant of Whitehead torpedoes after the turn of the century, exported worldwide; some units remained in service decades later. In 1940 a strait defense torpedo emplacement of the Oscarsborg Fortress sank the German heavy cruiser Blücher during the Battle of Drøbak Sound using multiple hits by Fiume Mark III torpedoes.
Different versions of the Mark III had letter designations denoting their compatibility with various launch tube hardware and other functional properties. Among these were "SL" (side lug), "HB" (hook bracket), "SR" (short range), "LR" (long range), "VB" (foreign-specification submerged launch tubes designed by Elswick). The designation "H" was also used to denote conversion to dry heater propulsion.
In 1919 it was approved to break up and scrap all remaining stocks of 18-inch Whitehead (Fiume) and Weymouth torpedoes possessed by the Royal Navy.
Fiume Mark III and Fiume Mark III HB
- Entered service: 1904
- Weight: 1,406 lb (638 kg)
- Length: 16 ft 8 in (5.08 m)
- Explosive charge: 205 lb (93 kg) Wet guncotton
- Range and speed: 1,000 yd (910 m) at 32 kn (59 km/h), 1,500 yd (1,400 m) at 28.6 kn (53.0 km/h), 2,000 yd (1,800 m) at 25.2 kn (46.7 km/h), 3,000 yd (2,700 m) at 20–21 kn (37–39 km/h)
- Notes: The hook bracket variant had a warhead charge of 200 lb (91 kg) and an overall weight of 1,398 lb (634 kg).
Fiume Mark III* SLSR and Fiume Mark III* SLLR
- Entered service: 1906
- Weight: 1,398 lb (634 kg)
- Length: 16 ft 4 in (4.98 m)
- Explosive charge: 200 lb (91 kg) Wet guncotton
- Range and speed: 1,000 yd (910 m) at 33.5 kn (62.0 km/h), 2,000 yd (1,800 m) at 26.5 kn (49.1 km/h) (SR), 2,000 yd (1,800 m) at 24.5 kn (45.4 km/h), 3,000 yd (2,700 m) at 20 kn (37 km/h) (LR)
- Notes: Range and speed data for SLLR extrapolated using previous and successive figures.
Fiume Mark III** SR, Fiume Mark III** LR and Fiume Mark III** VB
- Entered service: 1906
- Weight: 1,393 lb (632 kg)
- Length: 17 ft 4 in (5.28 m)
- Explosive charge: 200 lb (91 kg) Wet guncotton
- Range and speed: 1,000 yd (910 m) at 35 kn (65 km/h), 4,000 yd (3,700 m) at 22 kn (41 km/h) (SR), 2,000 yd (1,800 m) at 28.75 kn (53.25 km/h), 4,000 yd (3,700 m) at 21 kn (39 km/h) (LR), 2,000 yd (1,800 m) at 26.25 kn (48.62 km/h), 4,000 yd (3,700 m) at 19 kn (35 km/h) (VB)
- Notes: The SR and LR variants existed in both HB and SL versions. VB had an overall weight of 1,401 lb (635 kg). During the First World War, the VB variant was issued to HMS Gorgon and HMS Glatton.
Fiume Mark III** H SL and Fiume Mark III** H HB
- Entered service: 1909
- Weight: 1,423 lb (645 kg) (SL), 1,426 lb (647 kg) (HB)
- Length: 16 ft 8 in (5.08 m)
- Explosive charge: 200 lb (91 kg) Wet guncotton
- Range and speed: 3,000 yd (2,700 m) at 27.5 kn (50.9 km/h) (SL), 3,000 yd (2,700 m) at 29.5 kn (54.6 km/h) (HB)
- Notes: Dry heater conversions of older torpedoes, capable of a single speed setting only due to the limitations of their engines having originally been designed for compressed air. As of 1913, these weapons were allocated to HMS Shannon and HMS Cochrane.
RGF Mark I
,_Plymouth._Navy_and_Army_Illustrated.jpg)
A development of the earlier Fiume Mark I purchased from Whitehead, manufactured at the Royal Gun Factory in Woolwich. Existed in a "Short" and "Long" configuration. Manufacture began in 1891, with first deliveries taking place in 1892. Like its predecessor, the weapon utilized compressed air propulsion. Variants in service were denoted according to the launch tube hardware required for their employment, such as "SL" (side lug) or "HB" (hook bracket).[10]
Specifications:[11]
RGF Mark I Short
- Entered service: 1892
- Weight: 831 lb (377 kg)
- Length: 12 ft 4 in (3.76 m)
- Explosive charge: 200 lb (91 kg) Wet guncotton
- Range and speed: 600 yd (550 m) at 31 kn (57 km/h)
RGF Mark I Long
- Entered service: 1892
- Weight: 1,170 lb (530 kg)
- Length: 16 ft 5 in (5.00 m)
- Explosive charge: 200 lb (91 kg) Wet guncotton
- Range and speed: 800 yd (730 m) at 31 kn (57 km/h)
RGF Mark II
Developed at the Royal Gun Factory in 1893 as a lengthened version of the RGF Mark I. The Mark II had a strengthened head joint, a modified balance chamber for steadier running and was capable of a greater range of depth settings - 5 to 22 ft (1.5 to 6.7 m).
By the end of the First World War in 1918, only 33 units of the RGF Mark II remained in Royal Navy stockpiles, and it was approved to break up 12 of them for scrap that year.
RGF Mark II
- Entered service: 1893
- Weight: 1,227 lb (557 kg)
- Length: 16 ft 8 in (5.08 m)
- Explosive charge: 188 lb (85 kg) Wet guncotton
- Range and speed: 800 yd (730 m) at 30.5 kn (56.5 km/h)
RGF Mark II*
- Entered service: 1894
- Weight: 1,230 lb (560 kg) (approximate)
- Length: 16 ft 8 in (5.08 m)
- Explosive charge: 188 lb (85 kg) Wet guncotton
- Range and speed: 800 yd (730 m) at 30.5 kn (56.5 km/h), 1,500 yd (1,400 m) at 20.25 kn (37.50 km/h) (HB) or 1,500 yd (1,400 m) at 21.75 kn (40.28 km/h) (SL)
Weymouth Mark I
Summarize
Perspective
The Weymouth Mark I was the first Whitehead heated torpedo, a modification of a Fiume Mark III, first demonstrated in 1905 and put into series production the same year. Produced in the SL (side lug) variant, originally for use by torpedo boats; with the outbreak of the First World War, became reassigned to submarines due to urgent demand.
Specifications:[14]
Weymouth Mark I SL
- Entered service: 1905
- Propulsion: Dry heater
- Weight: 1,493 lb (677 kg)
- Length: 17 ft 6 in (5.33 m)
- Explosive charge: 198 lb (90 kg) Wet guncotton
- Range and speed: 1,000 yd (910 m) at 41 kn (76 km/h), 4,000 yd (3,700 m) at 28.5 kn (52.8 km/h)
- Notes: The world's first heated torpedo, demonstrated in 1905 at Bincleaves to an audience of British and Japanese experts.
Weymouth Mark I* SL
- Entered service: 1909
- Propulsion: Dry heater
- Weight: 1,426 lb (647 kg)
- Length: 17 ft 6 in (5.33 m)
- Explosive charge: 198 lb (90 kg) Wet guncotton or TNT
- Range and speed: 1,500 yd (1,400 m) at 40 kn (74 km/h), 4,000 yd (3,700 m) at 29 kn (54 km/h)
- Notes: Substantially improved depth-keeping mechanism and a much more reliable striker-fired contact fuze.
Mark V
Used on the River-class and 1905 Tribal-class destroyers.
- Year : about 1899[15]
- Weight : 1,353 lb (614 kg)
- Warhead : 296 lb (134 kg) including pistol
- Propulsion : Compressed air
Mark VI
Used on destroyers of the early 1900s.
- Year : about 1904[15]
- Performance : 28.5 knots (52.8 km/h; 32.8 mph) for 4,000 yd (3,700 m) or 41 knots (76 km/h; 47 mph) for 1,000 yd (910 m)
- Propulsion : Compressed air
Mark VII and VII*
Introduced on the 1908 members of the 1905 Tribal class destroyers. Used by torpedo boats built before the First World War and destroyers. Used by RAF flying boats in the 1920s.
- Year : 1907[15]
- Warhead : 320 lb (150 kg) TNT
- Performance :
- Mark VII :
30 knots (56 km/h; 35 mph) for 6,000–7,000 yd (5,500–6,400 m)
41 knots (76 km/h; 47 mph) for 3,000 yd (2,700 m) - Mark VII* :
29 knots (54 km/h; 33 mph) for 7,000 yd (6,400 m)
35 knots (65 km/h; 40 mph) for 5,000 yd (4,600 m)
- Mark VII :
- Propulsion : Wet-heater
Mark VIII
Summarize
Perspective
Designed 1912, in service 1913. Originally developed as submarine armament. Prior to 1912, Royal Navy submarines exclusively used cold (compressed air) torpedoes, due to safety, reliability, and logistics considerations - as heated torpedoes required special launch tube hardware which facilitated ignition of the heater. It was also thought that long range was unnecessary for submarines. By 1911 these problems had been obviated, and the first heated torpedo to be launched from a Royal Navy submarine had been an 18-inch RGF Mark VII*. The Mark VIII was a successor, the first heated torpedo to be designed from the ground up to be used by British submarines. In 1917, a new variant of the Mark VIII was designated for use as an aerial torpedo; ultimately the weapon would be used in this role until the mid-1930s. During the Second World War, a total of two Mark VIII torpedoes were launched at enemy targets, both by MTBs.
RGF Mark VIII
- Entered service: 1913
- Propulsion: Wet heater
- Weight: 1,422 lb (645 kg)
- Length: 16 ft 8 in (5.08 m)
- Explosive charge: 320 lb (150 kg) TNT
- Range and speed: 1,500 yd (1,400 m) at 41 kn (76 km/h), 3,500 yd (3,200 m) at 29 kn (54 km/h)
RGF Mark VIII*
- Entered service: 1914
- Propulsion: Wet heater
- Weight: 1,425 lb (646 kg)
- Length: 16 ft 8 in (5.08 m)
- Explosive charge: 320 lb (150 kg) TNT
- Range and speed: 1,500 yd (1,400 m) at 41 kn (76 km/h), 2,000 yd (1,800 m) at 39 kn (72 km/h), 3,500 yd (3,200 m) at 29 kn (54 km/h) 4,000 yd (3,700 m) at 28 kn (52 km/h)
Mark XI
Summarize
Perspective
Designed in 1934 and entered service in 1936. An aerial torpedo which served briefly. The design specifications called for an airdrop speed of 150 knots at an altitude of 30–100 ft (9.1–30.5 m), not to dive below 60 ft (18 m) after splashdown, and recover to its set depth within 400 yd (370 m). In service, the weapon suffered from poor durability due to the long flotation chamber. This prompted its replacement with the Mark XII. Remaining units were modified for surface vessel use and assigned to torpedo boats. During the Second World War, a mere 22 units of the Mark XI were expended.
Specifications:[18]
Mark XI
- Entered service: 1936
- Propulsion: Burner cycle
- Weight: 1,500 lb (680 kg) (approximate)
- Length: 16 ft (4.9 m) (approximate)
- Explosive charge: 465 lb (211 kg) TNT
- Range and speed: 1,500 yd (1,400 m) at 40 kn (74 km/h), 4,000 yd (3,700 m) at 24–25 kn (44–46 km/h)
- Max airdrop speed: 150 kn (280 km/h)
- Notes: Almost entirely used for training purposes only. Superseded by the Mark XII after 1937.
Mark XI Modified
- Entered service: 1940
- Propulsion: Burner cycle
- Weight: 1,500 lb (680 kg) (approximate)
- Length: 16 ft (4.9 m) (approximate)
- Explosive charge: 440 lb (200 kg) TNT
- Range and speed: 1,500 yd (1,400 m) at 40 kn (74 km/h), 3,000 yd (2,700 m) at 27 kn (50 km/h)
- Notes: Repurposed aerial torpedoes with modest modifications. Used by torpedo boats.
Mark XII
| 18-inch Mark XII | |
|---|---|
 A Mark XII torpedo fitted to a Bristol Beaufighter | |
| Type | Torpedo |
| Place of origin | United Kingdom |
| Service history | |
| In service | 1937-1945 |
| Production history | |
| Designed | 1935 |
| Specifications | |
| Mass | 1,548 lb (702 kg) |
| Length | 16 ft 3 in (4.95 m) |
| Diameter | 17.72 in (450 mm) |
| Warhead | TNT |
| Warhead weight | 388 lb (176 kg) |
| Engine | Burner cycle 140 hp (at 40 knots) |
| Maximum speed | 40 knots (74 km/h; 46 mph) for 1,500 yd (1,400 m) or 37 knots (69 km/h; 43 mph) for 3,500 yd (3,200 m) |
Aircraft launched, used by Fleet Air Arm and RAF Coastal Command.
Mark XIV
| 18-inch Mark XIV | |
|---|---|
| Type | Torpedo |
| Place of origin | United Kingdom |
| Production history | |
| Designed | around 1938 |
| Specifications | |
| Mass | 1,630 lb (740 kg) |
| Diameter | 17.72 in (450 mm) |
| Warhead | TNT |
| Warhead weight | 375 lb (170 kg) |
| Engine | Whitehead wet heater (methyl fuel) |
| Maximum speed | 45 knots (83 km/h; 52 mph) for 1,650 yd (1,510 m) or 41 knots (76 km/h; 47 mph) for 2,950 yd (2,700 m) |
The Mark XIV was an aircraft-launched torpedo. Stocks were lost with the fall of Singapore.
Mark XV
| 18-inch Mark XV | |
|---|---|
| Type | Torpedo |
| Place of origin | United Kingdom |
| Production history | |
| Designed | around 1942 |
| Specifications | |
| Mass | 1,801 lb (817 kg) |
| Diameter | 17.69 in (449 mm) |
| Warhead | TNT |
| Warhead weight | 545 lb (247 kg) |
| Engine | Whitehead wet heater (methyl fuel) |
| Maximum speed | 40 knots (74 km/h; 46 mph) for 2,500 yd (2,300 m) or 33 knots (61 km/h; 38 mph) for 3,200 yd (2,900 m) |
- Year: 1942
- Operators: Fleet Air Arm, RAF Coastal Command, Royal Navy
- Role: Aircraft and Motor Torpedo Boats, 1943 onwards
- Dimensions: 17.69 in (449 mm) × 17 ft 2.7 in (5.250 m)
- Warhead: 545 lb (247 kg) Torpex
- Propulsion: Burner cycle
- Performance: 40 knots (74 km/h; 46 mph) for 2,500 yd (2,300 m) or 33 knots (61 km/h; 38 mph) for 3,200 yd (2,900 m)[19]
Mark XVI
Electric torpedo project not completed.
Mark XVII
- United Kingdom, 1944
- Aircraft launched
- Operated by FAA, RAF Coastal Command, Blackburn Firebrand
- Dimensions: 17.72 in (450 mm) × 17 ft 3 in (5.26 m)
- Warhead: 600 lb (270 kg) Torpex
- Propulsion: Burner cycle
- Performance: 40 knots (74 km/h; 46 mph) for 2,500 yd (2,300 m)
Mark 30 Dealer
Summarize
Perspective
An air-dropped passive acoustic homing torpedo known as "Dealer". The program was initiated in 1943, with the goal of developing a parachute-dropped ASW weapon.[20] At the end of the Second World War the "Dealer" project was renamed "Dealer A" and became further branched out into the 21-inch "Bidder" and 18-inch "Dealer B" projects.[21] Thus, the Mark 30 Dealer was developed alongside the Mark 20 Bidder and shared elements of its design.[22] The original design for the Dealer torpedo (Dealer A) had no control surfaces, being steered by two propellers that varied in speed, in a manner similar to the Italian-supplied LT 350 used by Germany. Pitch control was achieved by moving the battery fore and aft. Dealer A did not see service use, but its successor, Dealer B (Mark 30 Mod 0), a conventional design of a passive acoustic homing finned torpedo using contra-rotating propellers, achieved a high hit rate against submerged targets during trials in 1953 and was issued starting in June 1954. Since Dealer A never entered service, Dealer B was simply called "Dealer". Approximately 1200 units were built in total, with the weapon serving in both the RN and RAF until 1970. The Mark 30 Mod 1, a successor design, had several improvements but this program was canceled in 1955 in favor of purchasing Mark 43 Mod 3 torpedoes from the United States.[23] The reason for this decision was the impending retirement of the Avro Shackleton and Fairey Gannet aircraft, with no adequate replacement; the upcoming Westland Wasp ASW helicopter was incapable of carrying the Mark 30.[24] Although the decision to retire the aircraft were stalled, the Mark 30 Mod 1 would not see development. Trials with the Mark 44 in 1956 indicated that the hit rate was approximately four times worse than the Mark 30 Dealer in its original form, but nonetheless, the British government went ahead with their decision, placing a contract with the Plessey Company for standardizing the American torpedoes for British use. The Mark 43 was intended to serve as a stopgap until the arrival of the Mark 44, but this did not occur until 1966.[21] In 1957, preliminary work was being done on a 14-inch, 25-knot active/passive homing aerial torpedo for helicopter delivery, using the motor of the Mark 30. This, much like the Mark 30 Mod 1, was passed up in favor of American torpedoes and the Mark 21 Pentane, which in turn would be cancelled shortly thereafter. Additionally, beginning in the mid-1960s, there was a project for a Mark 31 aerial torpedo successor to the Mark 30, designed to surpass the Mark 44. This project would be cancelled in 1971 in favor of purchasing the Mark 46.[25]
Mark 30 Mod 0
- Entered service: 1954
- Weight: 646 lb (293 kg)
- Length: 8 ft 0.5 in (2.451 m)
- Explosive charge: 90 lb (41 kg) Torpex
- Range and speed: 9,000 yd (8,200 m) at 12.5 kn (23.2 km/h), 2,500 yd (2,300 m) at 19 kn (35 km/h)
Project Camrose
Summarize
Perspective
Project for a rocket-propelled torpedo with the function of an anti-torpedo countermeasure, initiated in 1951.[27] A proposal for "Camrose" was drawn up soon after the end of the Second World War, but research only commenced in 1951 after a study was published detailing the feasibility of anti-torpedo torpedoes. The concept envisioned a rocket-like weapon launched in salvos from the decks of surface vessels, which would dive into water and proceed for some distance at a speed of 50 knots.[28] An acoustic influence fuze would listen for hostile torpedoes in its vicinity, and detonate its warhead when a weapon were detected within 45 feet (14 m). The resulting explosion would either destroy, damage, or sufficiently incapacitate the incoming weapon. The "Camrose" would have an effective range of approximately 1,200 yards (1,100 m). Rocket propulsion using solid fuel motors was selected due to its low cost compared to piston engines, as well as the instant no-maintenance readiness of the weapon, and the viability of propulsion while airborne. The initial concept considered 15-inch or 16-inch diameter bodies due to the practical problems of using larger bodies and being able to launch them in sufficient numbers; ultimately, the 18-inch Mark 15 torpedo was chosen for conversion to rocket propulsion instead. In 1952, the project's priority was greatly downgraded, which delayed prototype development. In 1954, the acoustic influence fuze was deemed to be sufficiently workable. Between 1953 and 1955, "Camrose" was developed in cooperation with the "Bootleg" rocket-propelled torpedo, using the test vehicles of the other project. In 1955, the "Camrose" project was canceled due to an assessment that warships would not be capable of carrying sufficient units of the countermeasure to defend themselves against hostile torpedoes. A fundamentally similar concept is the ASW rocket, such as the RBU.
Project Bootleg
Summarize
Perspective
Project for an aerial rocket-propelled ASuW non-homing torpedo, initiated in 1950.[27] Developed by Vickers-Armstrong. Trials of prototype units began in 1952. The development of "Bootleg" was motivated by the introduction of Sverdlov class cruisers, which featured new sophisticated anti-air artillery (for more information, see Sverdlov crisis). The weapon would approach the vicinity of the target while airborne, then impact the water and proceed towards the target as a high-speed torpedo, with a projected underwater speed of 65 knots. Upon integration with the "Camrose" project, functional prototypes were tested, called DTVs (Dynamic Test Vehicles) and ERVs (Experimental Rocket Vehicles). The initial concept used an 18-inch body, but the actual prototype weapon would increase the body diameter to 20 inches. Both "Bootleg" and "Camrose" had a similar appearance of a conventional torpedo with a ducted nozzle which did not have propellers, instead having a solid rocket motor with a high aspect ratio. The method of employment for the "Bootleg" would have involved a high-speed strike aircraft such as the Westland Wyvern or Blackburn Buccaneer tossing the weapon at an enemy warship from approximately 5,000 yards (4,600 m) or more, with the torpedo's motor igniting immediately, in flight. After traversing most of the distance while airborne, the torpedo would dive at high speed and reach the target underwater.
A test of the "Bootleg" ERV in 1954 demonstrated another potential of the weapon. The ERV was launched underwater, from a depth of 15 feet, at the Arrochar torpedo range in Loch Long, Scotland. It accelerated to 60 knots within two seconds, dived to a depth of 50 feet, then shot to the surface, emerging approximately 150 yards from the firing point after six seconds. Climbing at an angle of some 30 degrees to the horizontal, the ERV attained a maximal altitude of 200 feet, and after 14 seconds of flight, dived again some 900 yards from the point at which it emerged from the surface.[29] This demonstrated a potential use as a high-speed submarine-launched ASuW torpedo with an airborne component, compatible with 21-inch launch tubes, capable of far higher speeds than any existing conventional torpedo; the airborne segment had an effective speed of over 114 knots.
The "Bootleg" project was defunded and canceled alongside "Camrose" in 1955. The Red Angel anti-ship rocket was favored instead, due to its lower cost and greater simplicity. The basic fire control problem for "Bootleg" was deemed more complex.
Specifications:[30]
Bootleg ERV
- Prototype date: 1953
- Weight: 1,730 lb (780 kg)
- Diameter: 20 inches (51 cm)
- Length: 12 ft 6 in (3.81 m)
- Explosive charge: 575 lb (261 kg) Torpex
- Range and speed: Approximately 5,000 yd (4,600 m) at 300–500 kn (560–930 km/h) while airborne, approximately 1,000 yd (910 m) at 70 kn (130 km/h) while underwater
See also
References
External links
Wikiwand - on
Seamless Wikipedia browsing. On steroids.