Top Qs
Timeline
Chat
Perspective

Cambria Iron Company

United States historic place From Wikipedia, the free encyclopedia

Cambria Iron Companymap
Remove ads

The Cambria Iron Company of Johnstown, Pennsylvania, was a major producer of iron and steel that operated independently from 1852 to 1916. The company adopted many innovations in the steelmaking process, including those of William Kelly and Henry Bessemer.

Quick facts Location, Coordinates ...

Founded in 1852, the company became the nation's largest steel foundry within two decades. It was reorganized and renamed the Cambria Steel Company in 1898, purchased by Midvale Steel and Ordnance Company in 1916, and sold to the Bethlehem Steel Company in 1923.[4]

The company's facilities, which extend some 12 miles (19 km) along the Conemaugh and Little Conemaugh rivers, operated until 1992. Today, they are designated as a National Historic Landmark District. Several works by the firm are listed on the National Register of Historic Places.[1][5]

Remove ads

Facilities

The industrial facilities of the Cambria occupied five separate sites in and around Johnstown, Pennsylvania. Its earliest facilities, known as the Lower Works, are located on the east bank of the Conemaugh River, north of downtown Johnstown and the Little Conemaugh River.

The Gautier Plant is northeast of downtown Johnstown on the south side of the Little Conemaugh. Further up that river is the extensive Franklin Plant and Wheel Plant, while the Rod and Wire Plant is located on the west side of the Conemaugh River, north of the Lower Works.

Each of these facilities represents a different phase of development and growth of the steel industry. The Lower Works no longer has significant traces of the earliest facilities used in steel manufacturing. All five of these areas comprise the National Historic Landmark District designated in 1989.[6]

Remove ads

Company history

Summarize
Perspective
Thumb
Warehouse of Cambria Iron Works after the 1889 Johnstown Flood.

The Cambria Iron Company was founded in 1852 to provide iron for the construction of railroads. In 1854, the iron works, which had gone out of the blast, were purchased by a group of Philadelphia merchants led by Matthew Newkirk. After a fire destroyed the main rolling mill in 1857, Newkirk persuaded his co-investors to rebuild it on a larger scale.[7]

The company grew rapidly and by the 1870s, was a leading producer of steel and an innovator in the advancement of steelmaking technology. It performed early experiments with the Kelly converter, built the first blooming mill, and was one of the first plants to use hydraulics for the movement of ingots. It built one of the first plants to use the Bessemer process for making steel at a large scale. The company's innovations, methods, and processes were widely influential throughout the steel industry.[6]

The company was at its height in the 1870s, under the long-term leadership of general manager Daniel Johnson Morrell, who had overseen the expansion of the works into one of the largest producers of rails in the United States. He helped to end US dependence on British railroad construction imports.[8] A Republican, Morrell also served as a member of the 40th United States Congress and 41st United States Congresses from Pennsylvania, from 1867-1871.

Morrell became concerned about the South Fork Dam, which formed Lake Conemaugh above Johnstown and Cambria Iron Company's facilities. To monitor the dam, Morrell joined South Fork Fishing and Hunting Club, which owned the dam. Morrell campaigned to club officials to improve the dam, which he had inspected by his own engineers and by those of the Pennsylvania Railroad. Morrell offered to effect repairs, partially at his own expense, but was rejected by club president Benjamin F. Ruff. Morell died in 1885, his warnings unheeded.

On May 31, 1889, the dam failed, unleashing the Johnstown Flood. The flood killed more than 2,200 people—then the largest disaster in U.S. history—and badly damaged the Cambria Iron Company's facilities along the rivers. The company reopened one week later, but at reduced capacity, and it was eclipsed by other producers as it rebuilt.[8]

Thumb
View from Westmont, Pennsylvania. Blacksmith shop (octagon roof) and machine shop (raised roof) in the center.

After Morrell's death, his club membership was purchased by Cyrus Elder, who became the club's only Johnstown native; most of the men were from Pittsburgh. Elder was a former news editor who had become chief legal counsel for Cambria Iron Company.[9][10] His wife and daughter died in the flood. He continued to be a notable civic leader. He also wrote books and poetry.[11]

In 1916, Cambria Iron was acquired by Midvale Steel and Ordnance Company. Midvale sold the company to Bethlehem Steel in 1923.,[6] It operated continuously until 1992.[8]

Cambria Steel Company had formed a proprietary subsidiary shipping company called Franklin Steamship Company of Cleveland in 1906 and Beaver Steamship Company in 1916. Both companies were sold to Bethlehem Steamship Company in 1924.[12]

Remove ads

Works produced

Summarize
Perspective

Infrastructure whose parts were manufactured by the Cambria Company include the following (with variations in attribution). All have been listed on the National Register of Historic Places (NRHP):

See also

References

External links

Loading related searches...

Wikiwand - on

Seamless Wikipedia browsing. On steroids.

Remove ads
Remove ads