Compression member
Structural element that carries a load via a compressive force From Wikipedia, the free encyclopedia
Structural element that carries a load via a compressive force From Wikipedia, the free encyclopedia
Compression members are structural elements that are pushed together or carry a load; more technically, they are subjected only to axial compressive forces. That is, the loads are applied on the longitudinal axis through the centroid of the member cross section, and the load over the cross-sectional area gives the stress on the compressed member.
 | This article relies largely or entirely on a single source. (August 2024) |
![](#/media/File:"Amazing_pillars_and_beams_in_World_Heritage_Monument_Airavatesvara_Temple".JPG)
In buildings, posts and columns are almost always compression members, as are the top chord of trusses.
For a compression member, such as a column, the principal stress comes mainly from axial forces, that is forces that fall along one line, usually the centerline.[1] The loading capacity of a short column is determined by the strength limit of the material. The strength of a column of intermediate size is limited by its degree of inelasticity. A long column is constrained by the elastic limit (that is by the amount of buckling).[1]
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.
