Copper(I) phosphide

Copper phosphide, Cu₃P, also copper(I) phosphide, cuprous phosphide, cuprophosphorus and phosphor copper, is a compound of copper and phosphorus, a phosphide of copper. It has the appearance of yellowish-grey very brittle mass of crystalline structure. It does not react with water.

Copper(I) phosphide

Names
IUPAC name copper(I) phosphide
Other names copper phosphide, cuprous phosphide
Identifiers
CAS Number	12019-57-7 Y
3D model (JSmol)	Interactive image
ChemSpider	9725097 N
ECHA InfoCard	100.031.485
PubChem CID	159399
CompTox Dashboard (EPA)	DTXSID60894785
InChI InChI=1S/3Cu.P/q3*+1;-3 N Key: GKCDETHKBNXQFR-UHFFFAOYSA-N N InChI=1/3Cu.P/q3*+1;-3 Key: GKCDETHKBNXQFR-UHFFFAOYAH
SMILES [Cu+].[Cu+].[Cu+].[PH6-3]
Properties
Chemical formula	Cu3P
Molar mass	221.6127 g/mol
Appearance	yellowish grey crystals
Melting point	900 °C (1,650 °F; 1,170 K)
Magnetic susceptibility (χ)	−33.0·10−6 cm3/mol
Structure
Crystal structure	Na 3As (hexagonal, hP24)[1][2]
Space group	P63cm, No. 185
Hazards
NIOSH (US health exposure limits):
PEL (Permissible)	TWA 1 mg/m3 (as Cu)[3]
REL (Recommended)	TWA 1 mg/m3 (as Cu)[3]
IDLH (Immediate danger)	TWA 100 mg/m3 (as Cu)[3]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). N verify (what is YN ?) Infobox references

Recent crystallographic investigations have proven Cu₃P to be copper deficient, which means that the sum formula of this compound is more accurately expressed as Cu_3−xP.^[4]

Copper phosphide has a role in copper alloys, namely in phosphor bronze. It is a very good deoxidizer of copper.

Copper phosphide can be produced in a reverberatory furnace or in a crucible, e.g. by a reaction of red phosphorus with a copper-rich material. It can also be prepared photochemically, by irradiating cupric hypophosphite with ultraviolet radiation.^[5] It can also be produced by reducing copper(II) phosphate with aluminum.^[6]

When subjected to ultraviolet light, copper phosphide shows fluorescence.

A blue-black film of copper phosphide forms on white phosphorus when subjected to a solution of copper salt; wounds containing particles of phosphorus therefore have to be washed with 1% solution of copper sulfate. The particles then can be easily removed, which is helped by their fluorescence. Formation of protective layer of copper phosphide is also used in cases of phosphorus ingestion, when gastric lavage with copper sulfate is employed as part of the cure.^[7]