Top Qs
Timeline
Chat
Perspective

Didcot Railway Centre

Operational Railway museum in Oxfordshire, England From Wikipedia, the free encyclopedia

Didcot Railway Centremap
Remove ads

Didcot Railway Centre is a railway museum and preservation engineering site in Didcot, Oxfordshire, England. The site was formerly a Great Western Railway engine shed and locomotive stabling point.

Quick facts Established, Location ...
Remove ads

Background

Summarize
Perspective

The founders and commercial backers of the Great Western Railway (GWR) supported Isambard Kingdom Brunel's scheme to develop an integrated railway and steamship service which allowed trans-Atlantic passengers and freight quicker passage between London and New York City. However, whilst backing the scheme the railway had to make a profit, and so it took a number of detours and added both mainline and branch line traffic to increase its domestic earnings. This earned the railway the nickname The Great Way Round from its detractors.[1]

Whilst the route from London Paddington to Reading was relatively straight, the then obvious most direct route to Bristol would have taken the railway further south, thus avoiding both Didcot and Swindon. However, passenger and freight traffic both to and from Oxford and onwards to the West Midlands in part dictated a more northerly route. Also, Brunel had originally planned to cut through Savernake Forest near Marlborough, Wiltshire to Bristol, but the Marquess of Ailesbury, who owned the land, objected – having previously objected to part of the Kennet and Avon Canal running through his estate (see Bruce Tunnel). With the railway needing to run near to a canal at its midpoint – as it was cheaper to transport coal for trains along canals at this time – and with the need for the branch northwards to Cheltenham via Stroud, Swindon was the next logical choice for the junction (and later railway works), 20 miles (32 km) north of the original route. This dictated that the Oxford junction also be moved northwards, and hence via Didcot.[1] The Great Western Railway built the first rail line through Didcot in 1839 and opened its first station in 1844.

Construction

Thumb
Didcot Railway Centre, Oct 2001

Due to the technical operational difficulties of running and maintaining a mainline service from London to Bristol, as well as the need for servicing locomotives going to Oxford, Didcot became an obvious midpoint maintenance and stabling point. Having built a timber-framed 7 ft 14 in (2,140 mm) broad gauge shed on the original site during the railway's development west in the 1800s, in June 1932 a new steel-framed half-brick 4-road through shed (210 by 67 feet [64.01 m × 20.42 m]), was completed by the GWR under the Loans and Guarantees Act (1929). With shed code DID, it also included a repair shop (84 by 42 feet [25.6 m × 12.8 m]), coaling stage (43 by 36 feet [13.1 m × 11.0 m]), sand furnace (10 by 10 feet [3.0 m × 3.0 m]) and 65 feet (20 m) turntable and associated offices (210 by 15 feet [64 m × 5 m]).[1] During World War II, a standard steel-framed with corrugated iron-panel covered ash shelter was erected:[1] this was dismantled in early GWS days.

Operations

After World War II, the site remained virtually unchanged during the nationalised ownership of British Railways (BR), but for taking on the new code of 81E. The standard allocation of locomotives remained the same, with Halls, Dukedogs and Panniers making up the bulk of the depot's fleet.[1]

Closure

With the replacement of steam with diesel traction under the Modernisation Plan, the shed became redundant and was closed in June 1965.[1]

Remove ads

Formation and site lease

Summarize
Perspective

The Great Western Society (GWS) was offered the use of the former Didcot locomotive depot, taking it over in 1967. In the 1970s, the society negotiated a long-term lease with BR which was to expire in 2019. But this was subject to a six-month termination clause which could force the GWS to quit the site, and which could be operated at any point in time by lease-holder Network Rail (NR).

In an attempt to secure a long-term future for the society, in 2002 the GWS opened negotiations with NR to either purchase the site or extend the lease. In a letter dated May 2007, NR informed the GWS that they were prepared to sell the site subject to Office of Rail Regulation (ORR) approval. It had been thought the site could be subject to need as a depot, either due to: the rebuilding of Reading station; a Crossrail project depot; or the Intercity Express Programme. After expressing some concern at the slow speed of negotiations at the GWS annual meeting in September 2008, NR wrote to the GWS to advise that the site was no longer available for sale, and although a lease extension was still on offer it was still subject to the previous six-month termination clause. The GWS then wrote to their local MP Ed Vaizey, and placed any long-term development plans on hold.[2] As of 6 October 2011 Richard Croucher (Chairman of the Great Western Society) signed a new 50-year lease with Network Rail, therefore preserving the site for at least another 50 years.

Remove ads

Museum and railway centre

Summarize
Perspective
Thumb
Reconstructed mixed-gauge, 1,435 mm (4 ft 8+12 in) standard gauge / 7 ft 14 in (2,140 mm) track
Thumb
Travelling Post Office
Thumb
A reconstruction of Isambard Kingdom Brunel's atmospheric railway, using a segment of the original piping

Today the GWS have developed the site, which still retains many of the original GWR buildings and features, as both a working steam locomotive and railway museum, engineering maintenance centre, and railway line offering short rides to visitors.

Access via Didcot Parkway station brings the visitor into the southern end of the site, at the start of the ramp coal wagons would take up to the coaling stage. Beyond this is the original 1932 four-road engine shed, and beyond this the original repair shed and 1988 constructed locomotive works, both of which have restricted access due to safety concerns. Beyond this lies a Ransomes & Rapier 70 feet (21 m) turntable, originally built for the Southern Railway at Southampton Docks, installed in the original pit.

The centre regularly holds events such as steam and diesel railcar days. Members of the Great Western Society have been active in the preservation of locomotives and rolling stock. Certain 'new-build' projects to create locomotives that did not escape wholesale scrapping have also been undertaken at Didcot, such as the completed Firefly locomotive, a 'Saint' class (using a 'Hall' class chassis and boiler) and a 'County' class locomotive (using a 'Hall' class chassis and an LMS '8F' class boiler).

There is a small relics museum and archive on site, operated by the Great Western Trust.[3]

The Railway Centre has been used as a period film set and has featured in productions including Anna Karenina, Sherlock Holmes: A Game of Shadows, and The Elephant Man.[4]

Running lines

Thumb
The former broad-gauge transfer shed is now used as a station building on the branch line
Thumb
The broad-gauge transfer shed in its original location, with the provender store behind

There are three short lengths of running track, each with a station at both ends:

Branchline

This starts at a typical GWR wayside halt, named Didcot Halt, and runs north on the western edge of the site to a platform, named Burlescombe Station, at the transshipment shed. Dating from broad gauge days, the shed was used for transferring goods from broad to "narrow" (i.e. 4 ft 8+12 in or 1,435 mm standard gauge) rolling stock and vice versa. It was moved to its present location carefully from its original site nearby.

Broad Gauge Line

The broad gauge line of 7 ft 14 in (2,140 mm) starts from the transshipment shed, and runs halfway back down the branchline. The 2005 replica GWR Fire Fly is housed within the shed when not running

Mainline

Starting from the Main Line Platform opposite the site entrance, using a pre-fabricated concrete station platform from Eynsham, this runs on the eastern edge of the site to a newly built platform, named Oxford Road Station, near the transshipment shed. The reconstruction of the Brunel-designed building from Heyford station on this platform has been commenced.

Remove ads

Access

Railways around Didcot
Moreton Junction
Main to relief line crossovers
Didcot East Junction
Didcot Parkway
Didcot Railway Centre
Didcot West Junction
Didcot North Junction
Foxhall Junction
Didcot Power Station
Milton Park

The railway centre is entirely surrounded by active railway lines and has no road connection of any kind. Public access is on foot from a subway at Didcot Parkway station, which links the centre by rail to London and much of southern and central England. Wheelchair and pram access has been difficult due to the presence of a flight of concrete steps on Network Rail property. To comply fully with the Disability Discrimination Act, the Great Western Society constructed a ramped access in 2023–24.[5]

Remove ads

Collection

Summarize
Perspective

Steam locomotives

More information Class, Number (& Name) ...

Diesel locomotives

Including other non-steam powered vehicles

More information Class, Number (&Name) ...

Other rolling stock

The GWS has an extensive supporting collection of GWR rolling stock, including three of the GWR Super Saloons that serviced the boat train traffic to Plymouth. In addition it has some vehicles for staff and maintenance use.

Carriages

More information Type, Number (&Name) ...

Broad Gauge replica carriages

More information Type, Number (&Name) ...

Non-passenger-carrying coaching stock

More information Type, Number (&Name) ...

Wagons

More information Type, Number (&Name) ...
Remove ads

References

Loading related searches...

Wikiwand - on

Seamless Wikipedia browsing. On steroids.

Remove ads