Laser 2

The Laser 2, or Laser II, is a sailboat that was designed by New Zealander Frank Bethwaite and Canadian Ian Bruce as a one-design racer and first built in 1978.^{[3][4][5][6][7][8]}

Laser 2

Development
Designer	Frank Bethwaite Ian Bruce
Location	Canada
Year	1978
No. built	8,200
Builder(s)	Performance Sailcraft Vanguard Sailboats
Role	Racer
Name	Laser 2
Boat
Crew	two
Displacement	170 lb (77 kg)
Draft	3.50 ft (1.07 m) with daggerboard down
Hull
Type	monohull
Construction	fibreglass
LOA	14.42 ft (4.40 m)
LWL	13.83 ft (4.22 m)
Beam	4.67 ft (1.42 m)
Hull appendages
Keel/board type	daggerboard
Rudder(s)	transom-mounted rudder
Rig
Rig type	Bermuda rig
Sails
Sailplan	fractional rigged sloop
Total sail area	124.00 sq ft (11.520 m2)
Racing
D-PN	92.8[1]
RYA PN	1035[2]

Production

The design was built by Bruce's company, Performance Sailcraft, in Canada and also by Vanguard Sailboats in the United States. Production ran from 1978 until 1987, with 8,200 boats completed, but it is now out of production. In 2007 Performance Sailcraft and Vanguard were merged to form LaserPerformance.^{[3][4][9][10]}

Design

A Laser 2 flying its spinnaker, with the crew on the trapeze

The Laser 2 is a sailing dinghy, built predominantly of fibreglass. It has a fractional sloop rig, a raked stem, a plumb transom, a transom-hung rudder controlled by a tiller with an extension and a retractable daggerboard. It displaces 170 lb (77 kg). The crew can make use of a single trapeze.^[3][4]

The boat has a draft of 3.50 ft (1.07 m) with the daggerboard extended and 4 in (10 cm) with it retracted, allowing operation in shallow water, beaching or ground transportation on a trailer.^[3][4]

For sailing downwind the design may be equipped with a symmetrical spinnaker.^[3][4]

The design has a US Portsmouth Yardstick D-PN handicap of 92.8 and a UK RYA-PN of 1035.^[1][2]

Variants

The basic Laser 2 was produced in a number of variants, including the Laser II Fun, Laser II Regatta and the Laser Fun New Wave, which was equipped with an asymmetrical spinnaker. All were out of production by 1990.^[3][4]

Operational history

The boat was at one time a World Sailing international class, but its status has been revoked.^[11]

In a February 1980 review John Turnbull in Canadian Yachting wrote of the Laser 2, "Frank Bethwaite, the unclaimed maestro of high-powered dinghy design, and Ian Bruce, the designer / promoter of Performance Sailcraft, may have come up with the only boat that could live up to the expectations created by the Laser. It doesn't bring anything startlingly new to sailboat design except perhaps the idea that a mass-market boat should be fast and challenging."^[12]

Events

Main article: List of Laser 2 championships

See also

• List of sailing boat types

Related development

• Laser (dinghy)