Top Qs
Timeline
Chat
Perspective

Regular Production Option

From Wikipedia, the free encyclopedia

Remove ads
Remove ads

A Regular Production Option (RPO) is a 3-digit standardized code used by General Motors to designate vehicle options & modifications. RPO codes designate how a vehicle is built, and they've been used on dealership order forms and in assembly plants since at least the 1950s (see Corvette C1). It was originally all numeric and labeled Sales Codes; in 1970 GM switched to the alphanumeric RPO code.

Even base vehicles with few optional features will have multiple RPOs, since both standard components (like engine, transmission, and paint color) and extra cost options are assigned codes.

The complete configuration of a GM vehicle (as it exited the factory) can be described by specifying the base model and a complete list of its RPO codes.[1] Some dealerships are willing to run a VIN and print out its RPOs (with their definitions) free of charge. The records are in GMs' electronic database since at least the 1990 models. RPO decoder (for newer vehicles).

Beginning as early as 1967,[2] and to all their models since 1984, GM attached a Service Parts Identification (SPID) label. The label is most often located on the back of the glovebox door, on the inside of the trunk lid, or on the bottom of the spare tire cover. On some of the GM SUVs and mini-vans, the SPID label will be located on one of the plastic storage covers in the rear of the vehicle.

The SPID lists, in alphanumeric order, many of the options built into a vehicle, both RPOs and the older and longer Option Model numbers[3] (sometimes used before 1970). These codes are often valuable to help select the correct replacement parts during vehicle repairs.

In 2018, the SPID was replaced by a QR code label located on the B-pillar (driver's side, between front and rear doors). While fairly complete, it does not contain every RPO that is on the vehicle.

Remove ads

RPO code details & format

RPOs may be generic options (available on all models over many years), or specific options (available only on specific models for limited years). RPOs codes are assigned to align with specific component groups and with UPC groups as tabulated below:

More information UPC Group, Component Group ...
Remove ads

RPO codes as model names

Thumb
Z71 decals on a Chevy Silverado

A few RPO codes have become notable enough that they have been used as model names. The Camaro Z28 name came from an option code which specified a performance-oriented configuration. This happened again with the Corvette Z06 models. However most RPO codes that are promoted to model names are appearance packages only, and are not related to speed or engine performance. Two examples are the Z28 and Z71. In the 1980s you could order a Z28 Camaro with a 2.5 liter engine, although this was rare. RPO Z71 was an off-road suspension for trucks that is not related to the drivetrain. It became notable enough to be promoted to a package name, even applied as a logo sticker onto the vehicle rear quarter body panel. But although it usually came with four-wheel drive, you could actually order a two-wheel drive Z71.

Remove ads

Notable RPO codes

  • L78: big block V8 engine by Chevrolet
  • 9C1: Chevrolet police package
  • Z71: Truck Sports Package

References

Loading content...
Loading related searches...

Wikiwand - on

Seamless Wikipedia browsing. On steroids.

Remove ads