Top Qs
Timeline
Chat
Perspective

Secondary frequency standard

Standards in electronics and telecommunications From Wikipedia, the free encyclopedia

Remove ads

In telecommunications, a secondary frequency standard is a frequency standard that does not have inherent accuracy, and therefore must be calibrated against a primary frequency standard.

Secondary standards include crystal oscillators and rubidium standards. A crystal oscillator depends for its frequency on its physical dimensions, which vary with fabrication and environmental conditions. A rubidium standard is a secondary standard even though it uses atomic transitions, because it takes the form of a gas cell through which an optical signal is passed. The gas cell has inherent inaccuracies because of gas pressure variations, including those induced by temperature variations. There are also variations in the concentrations of the required buffer gases, which variations cause frequency deviations.

Remove ads

References

  • Public Domain This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 2022-01-22.


Loading related searches...

Wikiwand - on

Seamless Wikipedia browsing. On steroids.

Remove ads