The BL 8 inch guns Mark I to Mark VII[note 2] were the first generations of British rifled breechloaders of medium-heavy calibre. They were initially designed for gunpowder propellants and were of both 25.5 and 30 calibres lengths.

Quick Facts Ordnance BL 8 inch gun Mks I - VII, Type ...
Ordnance BL 8 inch gun Mks I - VII
Thumb
TypeNaval gun
Coast defence gun
Place of originUnited Kingdom
Service history
In service1884 - 190?
Used by United Kingdom
Colonial navies of Australia
 New Zealand
 Singapore
Production history
DesignerMk I, VI : RGF
Mk VII : EOC
ManufacturerMk I, III, IV : RGF
Mk III, IV, VI, VII EOC
Unit cost£6,015[1]
VariantsMks III, IV, VI, VII, VIIA
Specifications
MassMk III & VI : 14 tons
Mk IV : 15 tons
Mk VII : 12 tons
Mk VIIA : 13 tons barrel & breech[2]
Barrel lengthMk III : 201 inches (5,105 mm)
Mk VII : 204 inches (5,182 mm)
Mk IV & VI : 237 inches (6,020 mm) bore[2]

ShellMks III, IV, VI : 210 pounds (95.25 kg)
Mk VII : 180 pounds (81.65 kg)[note 1]
Calibre8-inch (203.2 mm)
Muzzle velocityMk III : 1,953 feet per second (595 m/s)[3]
Mk IV & VI : 2,150 feet per second (655 m/s)[4]
Mk VII : 2,000 feet per second (610 m/s)[5][6]
Maximum firing range8,000 yards (7,300 m)[2][7]
Close

History

Mks I and II were several early proof guns that did not enter British service and Mk V was not made. Limited numbers of 25.5 and 30 calibres guns were produced.

By 1885 the Royal Navy abandoned the 8-inch gun in favour of the 9.2 inch and later the 7.5 inch gun for cruisers, until 1923 when the restrictions of the Washington Naval Treaty led Britain to develop the Mk VIII 8-inch gun in order to arm heavy cruisers with the largest gun allowed by the Treaty.

In the interim Elswick Ordnance continued to develop 8-inch guns in 40 calibre and 45-calibre lengths for export, mainly to Japan.

Mark III

Mk III were low-powered 25-calibres guns mounted on :

Mark IV

Mk IV were 30-calibres guns mounted in :

Mark VI

Mk VI were 30 calibres guns mounted in :

Mark VII

Mk VII were lighter 25-calibres low-powered guns firing a lighter 180-pound projectile used to equip Australian colonial navies and Australian and New Zealand coastal defences in response to expected Russian expansionism in the Pacific (The "Russian scares" of the 1880s).

As mounted in bow of Gayundah, 1903

Mk VII guns armed the following Australian colonial gun vessels :

Coast defence gun

At Fort Queenscliff, Victoria, Australia

Mk VII guns were installed on disappearing mountings in Australia and New Zealand as coast-defence guns during the "Russian scares" of the 1880s. In the event, no Russian invasion occurred and the guns were rarely if ever fired.

Four Mk VII coast defence guns were installed at Singapore in the 1880s-1890s : two atop Mount Serapong and two at Fort Tanjong Katong.[8]

Ammunition

Surviving examples

See also

Notes

  1. Different types of shell had different weights : figures are for the gun's heaviest shell. Hence for the Mk VII gun the Victorian Navy Manual of 1895 quotes Common 168 lb, Segment 177 lb, Palliser, Case & Shrapnel 180 lb
  2. Mark I to Mark VII = Mark 1 to Mark 7. Britain used Roman numerals to denote marks (models) of ordnance until after World War II. Hence these were the first 7 models of BL 8-inch naval gun.

References

Bibliography

Wikiwand in your browser!

Seamless Wikipedia browsing. On steroids.

Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.

Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.