![cover image](https://wikiwandv2-19431.kxcdn.com/_next/image?url=https://upload.wikimedia.org/wikipedia/commons/thumb/5/52/K%25C3%25B6lner_Dom_-_Abbau_s%25C3%25BCd%25C3%25B6stliches_Ger%25C3%25BCst_Nordturm-2933.jpg/640px-K%25C3%25B6lner_Dom_-_Abbau_s%25C3%25BCd%25C3%25B6stliches_Ger%25C3%25BCst_Nordturm-2933.jpg&w=640&q=50)
Lifting beam
From Wikipedia, the free encyclopedia
The lifting beam (also known as traverse, spreader beam) is a steel beam that is attached to the hook of the crane in order to spread the slings from one end of an elongated load (like a wall panel) to another. The bottom of the beam has multiple connection points for hanging the load.[1]
![Thumb image](http://upload.wikimedia.org/wikipedia/commons/thumb/6/63/TUH40%2C13%2C35.jpg/320px-TUH40%2C13%2C35.jpg)
![Thumb image](http://upload.wikimedia.org/wikipedia/commons/thumb/5/52/K%C3%B6lner_Dom_-_Abbau_s%C3%BCd%C3%B6stliches_Ger%C3%BCst_Nordturm-2933.jpg/640px-K%C3%B6lner_Dom_-_Abbau_s%C3%BCd%C3%B6stliches_Ger%C3%BCst_Nordturm-2933.jpg)
The lifting beams are used in multiple cases:[2]
- lifting an asymmetrical load. Without a beam, it might be hard to strap the load so that its center of gravity is exactly below the hook;
- handling a long load with a single-hook crane. Sufficient spread between the slings prevents the load from slipping out;
- increase the headroom: slings cannot be stretched close to the horizontal direction, so attaching them directly to the hook requires a minimum distance from the hook to the load. When the lifting beam is used, the slings can be shorter, providing more vertical clearance during lifting;
- if the attachments of the load are on its vertical sides, the slings have to go over the edges of the load, which can damage these edges. A lifting beam allows attaching slings to the side lugs without touching the edges;
- the top of the beam can have two attachment points at the ends thus allowing two cranes to share the load.