Loading AI tools
Fortified structure From Wikipedia, the free encyclopedia
A casemate is a fortified gun emplacement or armoured structure from which guns are fired, in a fortification, warship, or armoured fighting vehicle.[1]
When referring to antiquity, the term "casemate wall" means a double city wall with the space between the walls separated into chambers, which could be filled up to better withstand battering rams in case of siege (see § Antiquity: casemate wall.)
In its original early modern meaning, the term referred to a vaulted chamber in a fort, which may have been used for storage, accommodation, or artillery which could fire through an opening or embrasure. Although the outward faces of brick or masonry casemates proved vulnerable to advances in artillery performance, the invention of reinforced concrete allowed newer designs to be produced well into the 20th century. With the introduction of ironclad warships, the definition was widened to include a protected space for guns in a ship, either within the hull or in the lower part of the superstructure. Although the main armament of ships quickly began to be mounted in revolving gun turrets, secondary batteries continued to be mounted in casemates; however, several disadvantages eventually also led to their replacement by turrets. In tanks that do not have a turret for the main gun, the structure that accommodates the gun is also called a casemate.
First recorded in French in the mid-16th century, from the Italian casamatta or Spanish casamata, perhaps meaning a slaughterhouse,[2] although it could derive from casa (in the sense of "hut"), and matta (Latin matta), "done with reeds and wickers", thus a low-roof hut without windows or other openings set in marshy place.[3] It could also come from casa matta with matta in the sense of "false".[4] However, it may have been ultimately derived from the Greek chásmata (χάσματα), a gap or aperture.[2]
The term casemate wall is used in the archaeology of Israel and the wider Near East, having the meaning of a double wall protecting a city[5] or fortress,[6] with transverse walls separating the space between the walls into chambers.[5] These could be used as such, for storage or residential purposes, or could be filled with soil and rocks during siege in order to raise the resistance of the outer wall against battering rams.[5] Originally thought to have been introduced to the region by the Hittites, this has been disproved by the discovery of examples predating their arrival, the earliest being at Ti'inik (Taanach) where such a wall has been dated to the 16th century BC.[7] Casemate walls became a common type of fortification in the Southern Levant between the Middle Bronze Age (MB) and Iron Age II, being more numerous during the Iron Age and peaking in Iron Age II (10th–6th century BC).[5] However, the construction of casemate walls had begun to be replaced by sturdier solid walls by the 9th century BC, probably due the development of more effective battering rams by the Neo-Assyrian Empire.[5][8] Casemate walls could surround an entire settlement, but most only protected part of it.[9] The three different types included freestanding casemate walls, then integrated ones where the inner wall was part of the outer buildings of the settlement, and finally filled casemate walls, where the rooms between the walls were filled with soil right away, allowing for a quick, but nevertheless stable construction of particularly high walls.[10]
In fortifications designed to resist artillery, a casemate was originally a vaulted chamber usually constructed underneath the rampart. It was intended to be impenetrable and could be used for sheltering troops or stores. With the addition of an embrasure through the scarp face of the rampart, it could be used as a protected gun position.[11] In bastion forts, artillery casemates were sometimes built into the flanks of bastions, but in action they quickly filled with smoke making them inoperable and for that reason, had fallen out of favor during the 17th century.[12]
In the late 18th century, Marc René, marquis de Montalembert (1714–1800) experimented with improved casemates for artillery, with ventilation systems that overcame the problem of smoke dispersal found in earlier works. For coastal fortifications, he advocated multi-tiered batteries of guns in masonry casemates, that could bring concentrated fire to bear on passing warships. In 1778, he was commissioned to build a fort on the Île-d'Aix, defending the port of Rochefort, Charente-Maritime. The outbreak of the Anglo-French War forced him to hastily to build his casemated fort from wood but he was able to prove that his well-designed casemates were capable of operating without choking the gunners with smoke.[13] The defenses of the new naval base at Cherbourg were later constructed according to his system.[14] After seeing Montalembert's coastal forts, American engineer Jonathan Williams acquired a translation of his book and took it to the United States, where it inspired the Second and Third Systems of coastal fortification; the first fully developed example being Castle Williams in New York Harbor which was started in 1807.[15][16]
In the early 19th century, French military engineer Baron Haxo designed a free-standing casemate that could be built on the top of the rampart, to protect guns and gunners from the high-angle fire of mortars and howitzers.[17]
The advantages of casemated artillery were proved in the Crimean War of 1853–1856, when attempts by the Royal Navy to subdue the casemated Russian forts at Kronstadt were unsuccessful, while a casemated gun tower at Sevastopol, the Malakoff Tower, could only be captured by a surprise French infantry attack while the garrison was being changed.[18] In the early 1860s, the British, apprehensive about a possible French invasion, fortified the naval dockyards of southern England with curved batteries of large guns in casemates, fitted with laminated iron shields tested to withstand the latest projectiles.[19]
However, in the American Civil War (1861–1865), the exposed masonry of casemate batteries was found to be vulnerable to modern rifled artillery; Fort Pulaski was breached in a few hours by only ten such guns. In contrast, hastily constructed earthworks proved much more resilient.[20] This led to casemates for artillery again falling out of favor. In continental Europe, they were often replaced by rotating gun turrets, but elsewhere large coastal guns were mounted in less expensive concrete gun pits or barbettes, sometimes using disappearing carriages to conceal the gun except at the moment of firing.[21] Casemates for secure barrack accommodation and storage continued to be built; the 1880s French forts of the Séré de Rivières system for example, had a central structure consisting of two stories of casemates, buried under layers of earth, concrete and sand to a depth of 18 metres (59 ft), intended to defeat the new high explosive shells.[22]
Towards the end of the century, Imperial Germany had developed a new form of fortification called a feste (German article: Festung#Feste), in which the various elements of each fort were more widely dispersed in the landscape. These works, the first of which was Fort de Mutzig near Strasbourg, had separate artillery blocks, infantry positions and underground barracks, all built of reinforced concrete and connected by tunnels or entrenchments. Although the main armament of these forts was still mounted in armored turrets, local defense was provided by separate protected positions for field guns; these concrete structures were copied by the French who called them casemates de Bourges (French article: Casemate de Bourges) after the proving ground where they had been tested.[23]
Following experience gained in the World War I, French engineers began to design a new scheme of fortifications to protect their eastern border, which became known as the Maginot Line. The main element of this line were large underground forts based on the feste principle, whose main armament was in turrets, however the countryside between them was defended by smaller self-sufficient works based on the earlier casemates de bourges, housing either light field guns or anti-tank guns.[24] As the World War II approached, similar casemate designs were adopted by other European nations as they offered protection from attacking aircraft. The German Organisation Todt undertook the development of casemates for the large coastal guns of the Atlantic Wall. Built of concrete up to 10 metres (33 ft) thick, they were thought to be able to withstand any form of attack.[25] Work by the Western Allies to develop countermeasures that could defeat casemates and other types of bunker resulted in weapons such as tank-mounted spigot mortars, rocket-assisted projectiles, recoilless rifles, various types of demolition charge and earthquake bombs.[26]
In warship design the term "casemate" has been used in a number of ways, but it generally refers to a protected space for guns within a ship's hull or superstructure.
The first ironclad warship, the French ironclad Gloire (1858), was a wooden steamship whose hull was covered with armored plating, tested to withstand the largest smoothbore guns available at the time. The response by the British Royal Navy to this perceived threat was to build an iron-hulled frigate, HMS Warrior (1860). However, it was realised that to armor all of the hull to fully withstand the latest rifled artillery would make it unfeasibly heavy, so it was decided to create an armored box or casemate around the main gun deck, leaving the bow and stern unarmored.[27]
The American Civil War saw the use of casemate ironclads: armored steamboats with a very low freeboard and their guns on the main deck ('Casemate deck') protected by a sloped armoured casemate, which sat atop the hull. Although both sides of the Civil War used casemate ironclads, the ship is mostly associated with the southern Confederacy, as the north also employed turreted monitors, which the south was unable to produce. The most famous naval battle of the war was the duel at Hampton Roads between the Union turreted ironclad USS Monitor and the Confederate casemate ironclad CSS Virginia (built from the scuttled remains of USS Merrimack).[28]
"Casemate ship" was an alternative term for "central battery ship" (UK) or "center battery ship" (US).[29] The casemate (or central battery) was an armored box that extended the full width of the ship protecting many guns. The armored sides of the box were the sides or hull of the ship. There was an armored bulkhead at the front and rear of the casemate, and a thick deck protecting the top. The lower edge of the casemate sat on top of ship's belt armour.[29] Some ships, such as HMS Alexandra (laid down 1873), had a two-story casemate.[30]
A "casemate" was an armored room in the side of a warship, from which a gun would fire. A typical casemate held a 6-inch gun, and had a 4-to-6-inch (100 to 150 mm) front plate (forming part of the side of the ship), with thinner armor plates on the sides and rear, with a protected top and floor,[31] and weighed about 20 tons (not including the gun and mounting).[32] Casemates were similar in size to turrets; ships carrying them had them in pairs, one on each side of the ship.
The first battleships to carry them were the British Royal Sovereign class laid down in 1889. They were adopted as a result of live-firing trials against HMS Resistance in 1888.[33] Casemates were adopted because it was thought that the fixed armor plate at the front would provide better protection than a turret,[32] and because a turret mounting would require external power and could therefore be put out of action if power were lost – unlike a casemate gun, which could be worked by hand.[32] The use of casemates enabled the 6-inch guns to be dispersed, so that a single hit would not knock out all of them.[32] Casemates were also used in protected and armored cruisers, starting with the 1889 Edgar class.[34] and retrofitted to the 1888 Blake class during construction.[34]
In the pre-dreadnought generation of warships, casemates were placed initially on the main deck, and later on the upper deck as well. Casemates on the main deck were very close to the waterline. In the Edgar-class cruisers, the guns in the casemates were only 10 feet (3.0 m) above the waterline.[35] Casemates that were too close to the waterline or too close to the bow (such as in the 1912 Iron Duke-class dreadnoughts) were prone to flooding, making the guns ineffective.[36]
Shipboard casemate guns were partially rendered obsolete by the arrival of "all-big gun" battleship, pioneered by HMS Dreadnought in 1906, but were reintroduced as the increasing torpedo threat from destroyers forced an increase in secondary armament calibre. Many battleships had their casemates plated over during modernization in the 1930s (or after the Attack on Pearl Harbor, in the case of US vessels) but some, like HMS Warspite carried them to the end of World War II. The last ships built with casemates as new construction were the American Omaha-class cruisers of the early 1920s and the 1933 Swedish aircraft cruiser HSwMS Gotland. In both cases the casemates were built into the forward angles of the forward superstructure (and the aft superstructure as well, in the Omahas).[citation needed]
This section needs additional citations for verification. (July 2022) |
In regards to armored fighting vehicles, casemate design refers to vehicles that have their main gun mounted directly within the hull and lack the rotating turret commonly associated with tanks.[37] Such a design generally makes the vehicle mechanically simpler in design, less costly in construction, lighter in weight and lower in profile. The saved weight can be used to mount a heavier, more powerful gun or alternatively increase the vehicle's armor protection in comparison to regular, turreted tanks. However, in combat the crew has to rotate the entire vehicle if an enemy target presents itself outside of the vehicle's limited gun traverse arc. This can prove very disadvantageous in combat situations.
During World War II, casemate-type armored fighting vehicles were heavily used by both the combined German Wehrmacht forces, and the Soviet Red Army. They were mainly employed as tank destroyers and assault guns. Tank destroyers, intended to operate mostly from defensive ambush operations, did not need a rotating turret as much as offensively used tanks, while assault guns were mainly used against fortified infantry positions and could afford a longer reaction time if a target presented itself outside the vehicle's gun traverse arc. Thus, the weight and complexity of a turret was thought to be unnecessary, and could be saved in favor of more capable guns and armor. In many cases, casemate vehicles would be used as both tank destroyers or assault guns, depending on the tactical situation. The Wehrmacht employed several casemate tank destroyers, initially with the still-Panzerjäger designation Elefant with an added, fully enclosed five-sided (including its armored roof) casemate atop the hull, with later casemate-style tank destroyers bearing the Jagdpanzer (literally 'hunting tank') designation, with much more integration of the casemate's armour with the tank hull itself. Examples are the Jagdpanzer IV, the Jagdtiger and the Jagdpanther.[38][39] Assault guns were designated as 'Sturmgeschütz', like the Sturmgeschütz III and Sturmgeschütz IV. In the Red Army, casemate tank destroyers and self-propelled guns bore an "SU-" or "ISU-" prefix, with the "SU-" prefix an abbreviation for Samokhodnaya Ustanovka, or "self-propelled gun". Examples are the SU-100 or the ISU-152. Both Germany and the Soviet Union mainly built casemate AFVs by using the chassis of already existing turreted tanks, instead of designing them from scratch.
While casemate AFVs played a very important role in World War II (the Sturmgeschütz III for example was the most numerous armored fighting vehicle of the German Army during the entire war), they became much less common in the post-war period. Heavy casemate tank destroyer designs such as the US T28 and the British Tortoise never went beyond prototype status, while casemate vehicles of a more regular weight, such as the Soviet SU-122-54, saw only very limited service. The general decline of casemate vehicles can be seen in the technological progress which resulted in the rise of universal main battle tanks, which unified in them the capability to take up the roles and tasks which in the past had to be diverted between several different classes of vehicles. However, vehicles such as the German Kanonenjagdpanzer of the 1960s still let the casemate concept live on, while the Swedish Army went as far as employing a casemate tank design, the Stridsvagn 103, or "S-Tank", as their main armored fighting vehicle from the 1960s until the 1990s, favoring it over contemporary turreted designs. Other casemate design ideas, such as the projected German Versuchsträger 1–2 with two main guns, were developed even later.
Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.