Loading AI tools
Simple curve of Euclidean geometry From Wikipedia, the free encyclopedia
A circle is a shape consisting of all points in a plane that are at a given distance from a given point, the centre. The distance between any point of the circle and the centre is called the radius. The length of a line segment connecting two points on the circle and passing through the centre is called the diameter. A circle bounds a region of the plane called a disc.
Circle  

Type  Conic section 
Symmetry group  O(2) 
Area  πR^{2} 
Perimeter  C = 2πR 
The circle has been known since before the beginning of recorded history. Natural circles are common, such as the full moon or a slice of round fruit. The circle is the basis for the wheel, which, with related inventions such as gears, makes much of modern machinery possible. In mathematics, the study of the circle has helped inspire the development of geometry, astronomy and calculus.
All of the specified regions may be considered as open, that is, not containing their boundaries, or as closed, including their respective boundaries.
The word circle derives from the Greek κίρκος/κύκλος (kirkos/kuklos), itself a metathesis of the Homeric Greek κρίκος (krikos), meaning "hoop" or "ring".^{[1]} The origins of the words circus and circuit are closely related.
Prehistoric people made stone circles and timber circles, and circular elements are common in petroglyphs and cave paintings.^{[2]} Discshaped prehistoric artifacts include the Nebra sky disc and jade discs called Bi.
The Egyptian Rhind papyrus, dated to 1700 BCE, gives a method to find the area of a circle. The result corresponds to 256/81 (3.16049...) as an approximate value of π.^{[3]}
Book 3 of Euclid's Elements deals with the properties of circles. Euclid's definition of a circle is:
A circle is a plane figure bounded by one curved line, and such that all straight lines drawn from a certain point within it to the bounding line, are equal. The bounding line is called its circumference and the point, its centre.
In Plato's Seventh Letter there is a detailed definition and explanation of the circle. Plato explains the perfect circle, and how it is different from any drawing, words, definition or explanation. Early science, particularly geometry and astrology and astronomy, was connected to the divine for most medieval scholars, and many believed that there was something intrinsically "divine" or "perfect" that could be found in circles.^{[5]}^{[6]}
In 1880 CE, Ferdinand von Lindemann proved that π is transcendental, proving that the millenniaold problem of squaring the circle cannot be performed with straightedge and compass.^{[7]}
With the advent of abstract art in the early 20th century, geometric objects became an artistic subject in their own right. Wassily Kandinsky in particular often used circles as an element of his compositions.^{[8]}^{[9]}
From the time of the earliest known civilisations – such as the Assyrians and ancient Egyptians, those in the Indus Valley and along the Yellow River in China, and the Western civilisations of ancient Greece and Rome during classical Antiquity – the circle has been used directly or indirectly in visual art to convey the artist's message and to express certain ideas. However, differences in worldview (beliefs and culture) had a great impact on artists' perceptions. While some emphasised the circle's perimeter to demonstrate their democratic manifestation, others focused on its centre to symbolise the concept of cosmic unity. In mystical doctrines, the circle mainly symbolises the infinite and cyclical nature of existence, but in religious traditions it represents heavenly bodies and divine spirits.
The circle signifies many sacred and spiritual concepts, including unity, infinity, wholeness, the universe, divinity, balance, stability and perfection, among others. Such concepts have been conveyed in cultures worldwide through the use of symbols, for example, a compass, a halo, the vesica piscis and its derivatives (fish, eye, aureole, mandorla, etc.), the ouroboros, the Dharma wheel, a rainbow, mandalas, rose windows and so forth.^{[10]} Magic circles are part of some traditions of Western esotericism.
The ratio of a circle's circumference to its diameter is π (pi), an irrational constant approximately equal to 3.141592654. The ratio of a circle's circumference to its radius is 2π.^{[loweralpha 1]} Thus the circumference C is related to the radius r and diameter d by:
As proved by Archimedes, in his Measurement of a Circle, the area enclosed by a circle is equal to that of a triangle whose base has the length of the circle's circumference and whose height equals the circle's radius,^{[11]} which comes to π multiplied by the radius squared:
Equivalently, denoting diameter by d, that is, approximately 79% of the circumscribing square (whose side is of length d).
The circle is the plane curve enclosing the maximum area for a given arc length. This relates the circle to a problem in the calculus of variations, namely the isoperimetric inequality.
If a circle of radius r is centred at the vertex of an angle, and that angle intercepts an arc of the circle with an arc length of s, then the radian measure 𝜃 of the angle is the ratio of the arc length to the radius:
The circular arc is said to subtend the angle, known as the central angle, at the centre of the circle. The angle subtended by a complete circle at its centre is a complete angle, which measures 2π radians, 360 degrees, or one turn.
Using radians, the formula for the arc length s of a circular arc of radius r and subtending a central angle of measure 𝜃 is
and the formula for the area A of a circular sector of radius r and with central angle of measure 𝜃 is
In the special case 𝜃 = 2π, these formulae yield the circumference of a complete circle and area of a complete disc, respectively.
In an x–y Cartesian coordinate system, the circle with centre coordinates (a, b) and radius r is the set of all points (x, y) such that
This equation, known as the equation of the circle, follows from the Pythagorean theorem applied to any point on the circle: as shown in the adjacent diagram, the radius is the hypotenuse of a rightangled triangle whose other sides are of length x − a and y − b. If the circle is centred at the origin (0, 0), then the equation simplifies to
The equation can be written in parametric form using the trigonometric functions sine and cosine as where t is a parametric variable in the range 0 to 2π, interpreted geometrically as the angle that the ray from (a, b) to (x, y) makes with the positive x axis.
An alternative parametrisation of the circle is
In this parameterisation, the ratio of t to r can be interpreted geometrically as the stereographic projection of the line passing through the centre parallel to the x axis (see Tangent halfangle substitution). However, this parameterisation works only if t is made to range not only through all reals but also to a point at infinity; otherwise, the leftmost point of the circle would be omitted.
The equation of the circle determined by three points not on a line is obtained by a conversion of the 3point form of a circle equation:
In homogeneous coordinates, each conic section with the equation of a circle has the form
It can be proven that a conic section is a circle exactly when it contains (when extended to the complex projective plane) the points I(1: i: 0) and J(1: −i: 0). These points are called the circular points at infinity.
In polar coordinates, the equation of a circle is
where a is the radius of the circle, are the polar coordinates of a generic point on the circle, and are the polar coordinates of the centre of the circle (i.e., r_{0} is the distance from the origin to the centre of the circle, and φ is the anticlockwise angle from the positive x axis to the line connecting the origin to the centre of the circle). For a circle centred on the origin, i.e. r_{0} = 0, this reduces to r = a. When r_{0} = a, or when the origin lies on the circle, the equation becomes
In the general case, the equation can be solved for r, giving Without the ± sign, the equation would in some cases describe only half a circle.
In the complex plane, a circle with a centre at c and radius r has the equation
In parametric form, this can be written as
The slightly generalised equation
for real p, q and complex g is sometimes called a generalised circle. This becomes the above equation for a circle with , since . Not all generalised circles are actually circles: a generalised circle is either a (true) circle or a line.
The tangent line through a point P on the circle is perpendicular to the diameter passing through P. If P = (x_{1}, y_{1}) and the circle has centre (a, b) and radius r, then the tangent line is perpendicular to the line from (a, b) to (x_{1}, y_{1}), so it has the form (x_{1} − a)x + (y_{1} – b)y = c. Evaluating at (x_{1}, y_{1}) determines the value of c, and the result is that the equation of the tangent is or
If y_{1} ≠ b, then the slope of this line is
This can also be found using implicit differentiation.
When the centre of the circle is at the origin, then the equation of the tangent line becomes and its slope is
An inscribed angle (examples are the blue and green angles in the figure) is exactly half the corresponding central angle (red). Hence, all inscribed angles that subtend the same arc (pink) are equal. Angles inscribed on the arc (brown) are supplementary. In particular, every inscribed angle that subtends a diameter is a right angle (since the central angle is 180°).
The sagitta (also known as the versine) is a line segment drawn perpendicular to a chord, between the midpoint of that chord and the arc of the circle.
Given the length y of a chord and the length x of the sagitta, the Pythagorean theorem can be used to calculate the radius of the unique circle that will fit around the two lines:
Another proof of this result, which relies only on two chord properties given above, is as follows. Given a chord of length y and with sagitta of length x, since the sagitta intersects the midpoint of the chord, we know that it is a part of a diameter of the circle. Since the diameter is twice the radius, the "missing" part of the diameter is (2r − x) in length. Using the fact that one part of one chord times the other part is equal to the same product taken along a chord intersecting the first chord, we find that (2r − x)x = (y / 2)^{2}. Solving for r, we find the required result.
There are many compassandstraightedge constructions resulting in circles.
The simplest and most basic is the construction given the centre of the circle and a point on the circle. Place the fixed leg of the compass on the centre point, the movable leg on the point on the circle and rotate the compass.
Apollonius of Perga showed that a circle may also be defined as the set of points in a plane having a constant ratio (other than 1) of distances to two fixed foci, A and B.^{[16]}^{[17]} (The set of points where the distances are equal is the perpendicular bisector of segment AB, a line.) That circle is sometimes said to be drawn about two points.
The proof is in two parts. First, one must prove that, given two foci A and B and a ratio of distances, any point P satisfying the ratio of distances must fall on a particular circle. Let C be another point, also satisfying the ratio and lying on segment AB. By the angle bisector theorem the line segment PC will bisect the interior angle APB, since the segments are similar:
Analogously, a line segment PD through some point D on AB extended bisects the corresponding exterior angle BPQ where Q is on AP extended. Since the interior and exterior angles sum to 180 degrees, the angle CPD is exactly 90 degrees; that is, a right angle. The set of points P such that angle CPD is a right angle forms a circle, of which CD is a diameter.
Second, see^{[18]}^{: 15 } for a proof that every point on the indicated circle satisfies the given ratio.
A closely related property of circles involves the geometry of the crossratio of points in the complex plane. If A, B, and C are as above, then the circle of Apollonius for these three points is the collection of points P for which the absolute value of the crossratio is equal to one:
Stated another way, P is a point on the circle of Apollonius if and only if the crossratio [A, B; C, P] is on the unit circle in the complex plane.
If C is the midpoint of the segment AB, then the collection of points P satisfying the Apollonius condition is not a circle, but rather a line.
Thus, if A, B, and C are given distinct points in the plane, then the locus of points P satisfying the above equation is called a "generalised circle." It may either be a true circle or a line. In this sense a line is a generalised circle of infinite radius.
In every triangle a unique circle, called the incircle, can be inscribed such that it is tangent to each of the three sides of the triangle.^{[19]}
About every triangle a unique circle, called the circumcircle, can be circumscribed such that it goes through each of the triangle's three vertices.^{[20]}
A tangential polygon, such as a tangential quadrilateral, is any convex polygon within which a circle can be inscribed that is tangent to each side of the polygon.^{[21]} Every regular polygon and every triangle is a tangential polygon.
A cyclic polygon is any convex polygon about which a circle can be circumscribed, passing through each vertex. A wellstudied example is the cyclic quadrilateral. Every regular polygon and every triangle is a cyclic polygon. A polygon that is both cyclic and tangential is called a bicentric polygon.
A hypocycloid is a curve that is inscribed in a given circle by tracing a fixed point on a smaller circle that rolls within and tangent to the given circle.
The circle can be viewed as a limiting case of various other figures:
Consider a finite set of points in the plane. The locus of points such that the sum of the squares of the distances to the given points is constant is a circle, whose centre is at the centroid of the given points.^{[22]} A generalization for higher powers of distances is obtained if under points the vertices of the regular polygon are taken.^{[23]} The locus of points such that the sum of the th power of distances to the vertices of a given regular polygon with circumradius is constant is a circle, if whose centre is the centroid of the .
In the case of the equilateral triangle, the loci of the constant sums of the second and fourth powers are circles, whereas for the square, the loci are circles for the constant sums of the second, fourth, and sixth powers. For the regular pentagon the constant sum of the eighth powers of the distances will be added and so forth.
Squaring the circle is the problem, proposed by ancient geometers, of constructing a square with the same area as a given circle by using only a finite number of steps with compass and straightedge.
In 1882, the task was proven to be impossible, as a consequence of the Lindemann–Weierstrass theorem, which proves that pi (π) is a transcendental number, rather than an algebraic irrational number; that is, it is not the root of any polynomial with rational coefficients. Despite the impossibility, this topic continues to be of interest for pseudomath enthusiasts.
Defining a circle as the set of points with a fixed distance from a point, different shapes can be considered circles under different definitions of distance. In pnorm, distance is determined by In Euclidean geometry, p = 2, giving the familiar
In taxicab geometry, p = 1. Taxicab circles are squares with sides oriented at a 45° angle to the coordinate axes. While each side would have length using a Euclidean metric, where r is the circle's radius, its length in taxicab geometry is 2r. Thus, a circle's circumference is 8r. Thus, the value of a geometric analog to is 4 in this geometry. The formula for the unit circle in taxicab geometry is in Cartesian coordinates and in polar coordinates.
A circle of radius 1 (using this distance) is the von Neumann neighborhood of its centre.
A circle of radius r for the Chebyshev distance (L_{∞} metric) on a plane is also a square with side length 2r parallel to the coordinate axes, so planar Chebyshev distance can be viewed as equivalent by rotation and scaling to planar taxicab distance. However, this equivalence between L_{1} and L_{∞} metrics does not generalize to higher dimensions.
The circle is the onedimensional hypersphere (the 1sphere).
In topology, a circle is not limited to the geometric concept, but to all of its homeomorphisms. Two topological circles are equivalent if one can be transformed into the other via a deformation of R^{3} upon itself (known as an ambient isotopy).^{[24]}
Of a triangle 
Of certain quadrilaterals
Of a conic sectionOf a torus

Seamless Wikipedia browsing. On steroids.
Every time you click a link to Wikipedia, Wiktionary or Wikiquote in your browser's search results, it will show the modern Wikiwand interface.
Wikiwand extension is a five stars, simple, with minimum permission required to keep your browsing private, safe and transparent.