DKW F5

The DKW F5 is a small, front-wheel drive saloon produced by Auto Union's DKW division from 1935 to 1936, as a replacement for the DKWs F4 (Meisterklasse) and F2 (Reichsklasse) models.

DKW F5 Reichsklasse / Meisterklasse
Overview
Manufacturer	Auto Union AG
Production	1935–1936
Assembly	Germany: Zwickau
Body and chassis
Layout	FF layout
Powertrain
Engine	584 cc & 692 cc two-stroke straight-2
Transmission	3-speed manual
Dimensions
Wheelbase	2,610 mm (102.8 in) (Reichsklasse sedan)
Length	3,750 mm (147.6 in) (Reichsklasse sedan)
Width	1,430 mm (56.3 in) (Reichsklasse sedan)
Height	1,480 mm (58.3 in) (Reichsklasse sedan)
Curb weight	700 kg (1,543 lb) (Reichsklasse sedan)
Chronology
Predecessor	DKW F2 DKW F4
Successor	DKW F7

DKW F5 Roadster (1938)

The body

The appearance of the F5 was little changed from those of the F2 and F4. However, the timber-frame construction of the central portion of the body was, in the F5, replaced with a steel frame. The outer skin of the body remained of fabric construction, with plywood support.

There were two broadly similar F5 saloons, sold as the Reichsklasse and Meisterklasse. They shared the same track and wheelbase, but the Meisterklasse was 3.5 cm longer. There were also two-seater cabriolet versions of each, along with a lighter bodied ‘Front Luxus Sport’ sports cabriolet for which a higher top speed of 90 km/h (56 mph) was claimed.

Engine and running gear

The cars had the two-cylinder two-stroke engines of their predecessors. The Meisterklasse 692 cc and 584 cc engine had an output of 20 hp. Respective claimed top speeds were 80 and 85 km/h (50 and 53 mph).

DKW had been producing small front wheel drive sedans since 1931. The incorporation of front wheel drive in the F5 was at this time still strikingly innovative in terms of the wider auto market, however.

The car featured a three-speed manual transmission system.

Commercial

Production of the F5 saloon ended in 1936 while production of the 20 bhp (15 kW) cabriolet versions continued for a further year. The car was replaced by the DKW F7. By the time that happened, approximately 60,000 F5s had been produced, placing this car among Germany's top sellers.^{[citation needed]}

Data

Technical data DKW F5 ^[1] (Manufacturer's figures except where stated)

DKW F5	’Reichsklasse’	’Meisterklasse’	’Front’ Cabriolet	’Front Luxus’ Cabriolet	’Front Luxus Sport’
Body	2-door saloon	2-door saloon	2-seater cabriolet	2-seater cabriolet	2-seater roadster
Produced:	1935–1936	1935–1936	1936	1936–1937	1936–1937
Engine:	Two-stroke 2-cylinder water-cooled, front-mounted
Displacement:	584 cc	692 cc	584 cc	692 cc	692 cc
Bore x stroke:	74 x 68	76 x 76	74 x 68	76 x 76	76 x 76
Max. power :	18 PS (13.2 kW)	20 PS (14.7 kW)	18 PS (13.2 kW)	20 PS (14.7 kW)
Electrical system:	6 volt
Max. speed  :	80 km/h (50 mph)	85 km/h (53 mph)	80 km/h (50 mph)	85 km/h (53 mph)	90 km/h (56 mph)
Dry weight:	700 kg (1,543 lb)	770 kg (1,698 lb)	650 kg (1,433 lb)	790–820 kg (1,742–1,808 lb)	700 kg (1,543 lb)
Track, front/rear:	1,110 / 1,220 mm (43.7 / 48.0 in)
Wheelbase:	2,610 mm (103 in)	2,610 mm (103 in)	2,400 mm (94 in)	2,610 mm (103 in)	2,500 mm (98 in)
Length:	3,750 mm (147.6 in)	3,985 mm (156.9 in)	3,450 mm (135.8 in)	3,995 mm (157.3 in)	3,745 mm (147.4 in)
Width:	1,430 mm (56 in)	1,465 mm (57.7 in)	1,450 mm (57 in)	1,480 mm (58 in)	1,440 mm (57 in)
Height:	1,480 mm (58 in)	1,500 mm (59 in)	1,440 mm (57 in)	1,440 mm (57 in)	1,410 mm (56 in)