Dolby E

Dolby E is a lossy audio compression and decoding technology developed by Dolby Laboratories that allows 6 to 8 channels of audio to be compressed into an AES3 digital audio stream that can be stored as a standard stereo pair of digital audio tracks.

Dolby E logo.

Up to six channels, such as a 5.1 mix, can be recorded as 16-bit Dolby E data. However, if more than six channels are required, such as 5.1 plus a stereo LtRt, the AES3 data must be formatted as 20-bit audio. This increases capacity to eight channels.

Dolby E should never reach home viewers, as it is intended for use during post-production when moving multichannel material between production facilities or broadcasters. It is decoded prior to transmission.

It is very important to ensure that a Dolby E stream is never played through monitors or headphones without decoding. Undecoded Dolby E data will be converted to analog as full scale (0 dBFS) digital noise that can easily damage loudspeakers or hearing. Unambiguous media labeling is essential to avoid this.

Products

Dolby E encoding and decoding is implemented using commercially available hardware or software.

Hardware

• Dolby DP571
• Dolby DP572
• Dolby DP568
• Dolby DP580
• Dolby DP591
• Dolby DP600
• Dolby DP600C

Software

• FFmpeg (only decoding)^[1]
• Avisynth (only decoding)^[2]
• Emotion Systems 'eNGINE'^[3]
• Minnetonka Audio 'AudioTools Server'^[4]
• Minnetonka Audio SurCode for Dolby E^[4]
• Neyrinck SoundCode For Dolby E