Glue stick

Not to be confused with glue sticks used for Hot-melt adhesive ("hot-glue guns").

Glue sticks are solid and hard adhesives in twist or push-up tubes. Users can apply glue by holding the open tube to keep their fingers clean and rubbing the exposed stick against a surface.

A selection of glue sticks manufactured by Pritt; "Pritt Stick (International version)", "Pritt Stick (UK version)" and Extra Strong "Power Pritt"

Applications

Most glue sticks are designed to glue paper and card stock together and are not as strong as some liquid-based variants. They can be used for craft and design, office use, and at school. There are several varieties: permanent,washable, acid-free,non-toxic, solvent-free, and dyed (e.g. to see where the glue is being applied).

Brands

In 1969, the German company Henkel invented the glue stick after studying the "twist-up ease" and convenience of lipstick applicators. The product was released under the Pritt Stick brand. By 1971 the Pritt Stick was being sold in 38 countries, and by 2001 in 121.^[1] The first solvent-free, multipurpose glue stick that could be used for other materials (e.g. wood, glass and some plastics) was the "PowerPritt", which was put on the market in 2003.^[2] There is also a "Pritt X", launched in 2010.

In the UK, the name "Pritt Stick" is often used as a generic term for any glue stick but it seems to be dying out more recently as a generic name.

Glue sticks are made under many brands and each may have different features to it. Various brands, such as Scotch, Elmer's, UHU, Kores, Giotto, UFO, Snopake, and Bostik U-Stick make glue sticks. Generic brands like M&G also manufacture glue sticks, utilizing the twist action.

Sizes

Glue sticks can come in many sizes, the most common ones are 8g, 22g, 25g, 36g, and 43g.

Material

Known materials to be used for glue sticks are PVA or PVP.

Composition

Glue stick compositions are often proprietary and vary by manufacturer and type. The 3M product contains the following ingredients:^[3]

Name	% content	Purpose
Water	40%	Evaporates to allow the glue to dry.
Acrylic polymer	40%	Polymerizes to solidify dried glue.
Sodium stearate	10%	This soap helps emulsify the acrylic, and lubricates the glue to apply smoothly.
Polyethylene glycol	3%	Keeps dried glue somewhat moist and flexible.
Polyoxyethylene monooctylpphenyl ether	2%	Emulsifier.
N-Vinylpyrrolidone monomer	2%	Polymerizes as the glue dries.
2-amino isobutanol	2%	pH buffer, to neutralize acid.
Sodium hydroxide	0.3%	Alkali, to keep stick pH above 10.

The reportable composition of a Pritt Stick is as follows:^[4]

Name	EC number	CAS number	% content	Risk Statements
Caprolactam	203-313-2	105-60-2	1–5%	Xn;R20/22 Xi;R36/37/38
Hydrogen peroxide solution ...%	231-765-0	7722-84-1	<1%	O;R8 C;R34
Sodium hydroxide	215-185-5	1310-73-2	<1%	C;R35

Other brands use, e.g., polyvinylpyrrolidone (PVP) as the glue substance.^{[citation needed]}