Top Qs
Timeline
Chat
Perspective
Italian destroyer Francesco Stocco
From Wikipedia, the free encyclopedia
Remove ads
Francesco Stocco was the third of four Giuseppe Sirtori-class destroyers built for the Italian Regia Marina (Royal Navy) in the 1910s.
Remove ads
Design
Summarize
Perspective
The ships of the Giuseppe Sirtori class were 72.5 m (237 ft 10 in) long at the waterline and 73.54 m (241 ft 3 in) long overall, with a beam of 7.34 m (24 ft 1 in) and a mean draft of 2.7 m (8 ft 10 in). They displaced 709 t (698 long tons) standard and up to 914 t (900 long tons) at full load. They had a crew of 98 officers and enlisted men. The ships were powered by two steam turbines, with steam provided by four Thornycroft water-tube boilers. The engines were rated to produce 15,500 shaft horsepower (11,600 kW) for a top speed of 30 knots (56 km/h; 35 mph), though in service they reached as high as 33.6 knots (62.2 km/h; 38.7 mph) from around 17,000 shp (13,000 kW). At a more economical speed of 15 knots (28 km/h; 17 mph), the ships could cruise for 1,700 nautical miles (3,100 km; 2,000 mi).[1][2]
Franco Stocco was armed with a main battery of six 102 mm (4 in) guns. Her light armament consisted of a pair of 40 mm (1.6 in) anti-aircraft guns and two 6.5 mm (0.26 in) machine guns. She was also equipped with four 450 mm (17.7 in) torpedo tubes in two twin launchers, one on each side of the ship. The ship also carried ten naval mines.[1]
Remove ads
Service history
Francesco Stocco was built at the Cantieri navali Odero shipyard in Sestri Ponente, and was launched on 5 June 1917.[1]
After the Italian surrender to the Allies on 3 September 1943, German forces launched a major attack against their erstwhile ally. Francesco Stocco was attacked and sunk by German bombers on 24 September while cruising off Corfu.[1]
Notes
References
Wikiwand - on
Seamless Wikipedia browsing. On steroids.
Remove ads