Top Qs
Timeline
Chat
Perspective

Narrowband

Concept in radio communications From Wikipedia, the free encyclopedia

Remove ads

Narrowband signals are signals that occupy a narrow range of frequencies or that have a small fractional bandwidth.[1] In the audio spectrum, narrowband sounds are sounds that occupy a narrow range of frequencies. In telephony, narrowband is usually considered to cover frequencies 300–3400 Hz, i.e. the voiceband.

In radio communications, a narrowband channel is a channel in which the bandwidth of the message does not significantly exceed the channel's coherence bandwidth.

In the study of wired channels, narrowband implies that the channel under consideration is sufficiently narrow that its frequency response can be considered flat. The message bandwidth will therefore be less than the coherence bandwidth of the channel. That is, no channel has perfectly flat fading, but the analysis of many aspects of wireless systems is greatly simplified if flat fading can be assumed.

Remove ads

Two-way radio narrowband

Two-Way Radio Narrowbanding refers to a U.S. Federal Communications Commission (FCC) Order issued in December 2004 requiring all CFR 47 Part 90 VHF (150–174 MHz) and UHF (421–470 MHz) PLMR (Private Land Mobile Radio) licensees operating legacy wideband (25 kHz bandwidth) voice or data/SCADA systems to migrate to narrowband (12.5 kHz bandwidth or equivalent) systems by 1 January 2013.[2]

Remove ads

See also

Call 911References

Loading related searches...

Wikiwand - on

Seamless Wikipedia browsing. On steroids.

Remove ads