Round turn and two half-hitches

The round turn and two half hitches is a hitch used to secure the end of a rope to a fixed object. The name refers to the components used to form the knot: a round turn wraps the rope around the object (completely encircling it) and the two half hitches secure the end around the standing part. Variations of this hitch can be made with differing numbers of turns and half-hitches; an example is illustrated below. With additional turns, it becomes a pipe hitch.

Round turn and two half-hitches
Names	Round turn and two half-hitches, Round turn and a half-hitch, Two round turns and two half-hitches, etc.
Category	Hitch
Related	Two half-hitches, Clove hitch, Buntline hitch, capstan equation
Typical use	Secure the end of a rope to a fixed object.
ABoK	#1720, #1721, #1784, #1834, #1835, #1836, #1883, #1884, #1910

The Round Turn and Two Half Hitches is named by Steel in 1794. If a spar is small, a round turn is preferable to a single turn. It makes a stronger knot and dissipates the wear.

— The Ashley Book of Knots^[1]

Two round turns and three half hitches.