Shipman 28

The Shipman 28, also sold as the Baltic 28, is a Swedish sailboat that was designed by Olle Enderlein as a cruiser and first built in 1969.^[1][2][3][4]

Shipman 28

Development
Designer	Olle Enderlein
Location	Sweden
Year	1969
No. built	about 1,000
Builder(s)	Shipman Sweden AB Fiberman Composite Racing Products Visby Albin Marine Baltic Marine
Role	Cruiser
Name	Shipman 28
Boat
Displacement	6,614 lb (3,000 kg)
Draft	5.09 ft (1.55 m)
Hull
Type	monohull
Construction	fibreglass
LOA	29.06 ft (8.86 m)
LWL	21.00 ft (6.40 m)
Beam	8.53 ft (2.60 m)
Engine type	Faryman A40 12 hp (9 kW) diesel engine Hydrostatic transmission (Hydromarine)
Hull appendages
Keel/board type	fin keel
Ballast	2,667 lb (1,210 kg)
Rudder(s)	skeg-mounted rudder
Rig
Rig type	Bermuda rig
I foretriangle height	35.10 ft (10.70 m)
J foretriangle base	10.66 ft (3.25 m)
P mainsail luff	31.82 ft (9.70 m)
E mainsail foot	10.17 ft (3.10 m)
Sails
Sailplan	masthead sloop
Mainsail area	175 sq ft (16.3 m2)
Jib/genoa area	132 sq ft (12.3 m2)
Spinnaker area	646 sq ft (60.0 m2)
Gennaker area	285 sq ft (26.5 m2)
Other sails	Storm jib: 58 sq ft (5.4 m2)
Upwind sail area	461 sq ft (42.8 m2)
Downwind sail area	821 sq ft (76.3 m2)

Production

The design was built by Shipman Sweden AB, Visby and Albin Marine, all in Sweden and Fiberman Composite Racing Products in the Republic of Ireland. About 1,000 boats were completed between 1969 and 1979, but it is now out of production.^{[1][2][5][6][7]}

The boat was also built by Baltic Marine and sold as the Baltic 28.^[1]

Design

Shipman 28

Shipman 28

The Shipman 28 is a recreational keelboat, built predominantly of fibreglass. It has a masthead sloop rig with aluminum spars, a deck-stepped mast, wire standing rigging and a single set of unswept spreaders. The hull has a spooned raked stem; a raised counter, reverse transom; a skeg-mounted rudder controlled by a tiller and a fixed fin keel. It displaces 6,614 lb (3,000 kg) and carries 2,667 lb (1,210 kg) of ballast.^[1][2]

The boat has a draft of 5.09 ft (1.55 m) with the standard keel and is fitted with a Faryman a40 diesel engine of 8 to 12 hp (6 to 9 kW) with hydraulic (Hydromarine) transmission for docking and manoeuvring.^[1][2]

The design has sleeping accommodation for four people (six when fold navigation table), with a double "V"-berth in the bow cabin, a straight settee in the main cabin and an aft cabin with a single berth on the starboard side. The galley is located on the port side at the companionway ladder. The galley is equipped with a two-burner stove and a single stainless steel sink. A dinette table is opposite the galley, on the starboard side. The head is located just aft of the bow cabin on the starboard side.^[1][2]

The maximum below-decks headroom is 71 in (180 cm) in the main cabin. The saloon has 62 in (157 cm) of headroom and the aft cabin 61 in (155 cm).^[2]

For sailing downwind the design may be equipped with a symmetrical spinnaker of 646 sq ft (60.0 m²). It has a hull speed of 6.49 kn (12.02 km/h).^[2]

Operational history

The boat is supported by an active class club based in Denmark, that organizes racing events, the Shipman 28 Klubben (English: Shipman 28 Club).^[8]

Matt Rutherford sailed an Albin Vega on the first solo non-stop circumnavigation of the Americas.

See also

• List of sailing boat types