Top Qs
Timeline
Chat
Perspective
Sim racing wheel
Video game controller From Wikipedia, the free encyclopedia
Remove ads
A sim racing wheel, also known as racing wheel, is a control device for use in racing games, racing simulators, and driving simulators. They are usually packaged with a large paddle styled as a steering wheel, along with a set of pedals for the accelerator, brake, and clutch, as well as transmission controls. An analog wheel and pedal set such as this allows the user to accurately manipulate steering angle and pedal control that is required to properly manage a simulated car, as opposed to digital control such as a keyboard. The relatively large range of motion further allows the user to more accurately apply the controls. Racing wheels have been developed for use with arcade games, game consoles, personal computers, and also for professional driving simulators for race drivers.
Remove ads
History
Racing wheels have long been a feature of arcade racing games, with a steering wheel typically part of the arcade cabinet. International Mutoscope Reel Company's electro‑mechanical (EM) game Drive Mobile (1941) featured a steering wheel.[1] Kasco's EM game Indy 500 (1968) featured a racing wheel and accelerator pedal.[2][3] Atari's Gran Trak 10 (1974) was the first video game with a steering wheel.[4][5] Sega's Out Run (1986) featured a hydraulic motion simulator cabinet with a force feedback racing wheel, a stick shift, and acceleration and brake pedals.[6][7][8]
In the home PC game market, racing wheels began appearing in the 1990s. One of the earliest racing wheels for the PC mass market was the Thrustmaster Formula T1, released in 1994.[9][10] It had no force feedback, only some form of spring-based centering resistance proportional to the steering angle.[11] Two of the earliest FFB wheels for the consumer PC market were the Microsoft Sidewinder Force Feedback Wheel,[12] released in 1997, and the Logitech Wingman Formula Force.
Remove ads
Force feedback
Summarize
Perspective
Force feedback sim wheels have motors to simulate steering kickback. Racing wheels started off as simple plastic wheels hooked up to a rotary potentiometer, which were sprung by springs or bungees. These spring-based wheels had a reactive torque that increased proportionally only to the steering angle, without regard for the simulated vehicle dynamics.[13]
Eventually manufacturers began to use electric motors in the controllers, in place of springs, in order to achieve a level of force feedback (sometimes abbreviated FFB), first seen in Microsoft's Sidewinder wheel. At first this technology simply provided the centering force and other artificial effects such as shaking the wheel in a crash or other vibrations. However, as driving simulations have evolved, their physics engines have become more elaborate,[citation needed] allowing also for linking the force feedback close to the simulated vehicle dynamics of the in-game physics.[13] This allows the user to truly feel what forces go through the steering rack, instead of just artificial effects, and genuinely enhance the realism of the game.[citation needed] A fundamental factor for an adequate subjective steering-feel and perception of drivability from a force feedback wheel, is the transfer function from steering torque to steering angle.[14][15]
In 2015, a preliminary comparison of gear-driven and direct-drive wheels in the 0–30 Hz frequency range, for a study on hard real-time multibody simulation and high-fidelity steering wheel force feedback, concluded that direct-drive wheels are preferable.[16]
Remove ads
Buttons
Sim racing wheels, like real-world racing steering wheels, can have many buttons. Some examples are cruise control or pit-lane limiter for the pit lane, button for flashing lights, windscreen wipers, radio communication with the team, adjustments to the racing setup (such as brake balance, brake migration, differential braking (entry, mid+, exit, hi-speed; to make use of torque effectively at different points in a corner[17]), traction control (amplitude and sensitivity), anti-roll bar adjustment (front and rear), engine program (strat mode/ engine mode to get extra power or conserve fuel and engine life), engine braking (the engine's throttle or absence of throttle when there is no input from the gas pedal, i.e. whether the engine contributes to the car slowing down or is keeping its speed), etc.), seeing sideways or in the mirror, or to browse various menus (for example using a 7-way «funky switch»).
Comparison of racing wheels
Summarize
Perspective
Subsections by motor type: no FFB, gear- or belt-driven, and direct-drive wheels.
Wheel rims
No FFB
Gear- and/or belt-driven
Earlier products
Gear-driven
Hybrid gear and belt-driven
Belt-driven
Direct-drive bases or wheel + base combos
Other types / uncategorized
Pedals
Other features by which pedals can be compared are whether they can be inverted (hanging pedals), build material (plastic, aluminum), adjustability (position, pressure, travel), measured pressure, travel length, sensor resolution.[80]
Potentiometer-based and magnetic brake
Loadcell brake
Shifters
Remove ads
Notes
See also
- HOTAS (hands on throttle-and-stick)
- Linkage (mechanical)
- Sim racing
- Sim racing pedals
- Sawtooth wave
References
Wikiwand - on
Seamless Wikipedia browsing. On steroids.
Remove ads