Socket M

Socket M (mPGA478MT) is a CPU interface introduced by Intel in 2006 for the Intel Core line of mobile processors.^[5]

Socket M

Type	PGA-ZIF
Chip form factors	Flip-chip pin grid array
Contacts	478 (not to be confused with the previous Socket 479)
FSB frequency	533 MT/s, 667 MT/s, 800MT/s
Processors	Intel Core Solo T1200, T1250, T1300, T1350, T1400, T1500[1] Intel Core Duo T2050, T2250, T2300, T2300E, T2330, T2350, T2400, T2450, T2500, T2600, T2700[2] Intel Core 2 Duo T5200, T5300, T5500, T5600, T7200, T7400, T7600, T7600G[3] Intel Pentium Dual-Core T2060, T2080, T2130 Intel Celeron M Intel Celeron 1.66 GHz[4]
Predecessor	Socket 479
Successor	Socket P
This article is part of the CPU socket series

Inside of old Sony VAIO laptop (VGN-C140G)

Technical specifications

Socket M is used in all Intel Core products, as well as the Core-derived Dual-Core Xeon codenamed Sossaman. It was also used in the first generation of the mobile version of Intel's Core 2 Duo, specifically, the T5x00 and T7x00 Merom lines (referred to as Napa Refresh), though that line switched to Socket P (Santa Rosa) in 2007. It typically uses the Intel 945PM/945GM chipsets which support up to 667 MHz FSB and the Intel PM965/GM965 which allows 800 MHz FSB support, though the Socket M, PM965/GM965 combination is less common. The "Sossaman" Xeons use the E7520 chipset.

Relation to other sockets

Socket M is pin-compatible with desktop socket mPGA478A but it is not electrically compatible.^[6] Socket M is not pin-compatible with the older desktop Socket 478 (mPGA478B) or the newer mobile Socket P (mPGA478MN) by location of one pin; it is also incompatible with most^[7] versions of the older mobile Socket 479. Pentium III-M processors designed for the first version of Socket 479 will physically fit into a Socket M, but are electrically incompatible with it.^[8] Although conflicting information has been published, no 45 nm Penryn processors have been released for Socket M.

See also

• List of Intel microprocessors