Top Qs
Timeline
Chat
Perspective
Solar road stud
LED road marking From Wikipedia, the free encyclopedia
Remove ads
Solar road studs are flashing solar cell powered LED low-maintenance lighting devices that delineate road edges and centrelines. Embedded in the road surface, they are an electronic improvement on the traditional cat's eyes[1] and raised pavement marker in that they may give drivers a larger reaction window.
 | This article needs additional citations for verification. (June 2021) |
Averaging about 100 mm square or 100 mm diameter and about 40 mm thick, units are extremely robust to avoid damage by passing vehicles, and are normally constructed of engineering plastics and polycarbonates. Use of solar road studs reduces the necessity of headlight main beams and the accompanying hazard of dazzling oncoming drivers. They are also more visible in rain and fog conditions where the old type retroreflectors and road markings are problematic. The solar cells charge batteries or capacitors during sunlit hours, over which period the flashing LEDs are turned off by a photodetector.[2]
Remove ads
Uses
Some examples of uses are listed:[3]
- Ground lights to warn traffic of an upcoming road hazard or road work.
- Improving road illumination in general within the city at night.
- Improving road illumination on winding hazardous back roads at night.
- Improving road illumination at industrial or shipping sites.
- Remote airstrip runway lighting.
- Lighting for outdoor mining operations.
- Adding or improving illumination on farms for animal or equipment.
- At home outdoor décor.
Remove ads
See also
References
Wikiwand - on
Seamless Wikipedia browsing. On steroids.
Remove ads