Tokyo Gate Bridge

Tokyo Gate Bridge (東京ゲートブリッジ, Tōkyō Gēto Burijji) is a truss cantilever bridge across Tokyo Bay in Kōtō, Tokyo, Japan. It opened on 12 February 2012^[1]^[2] with an estimated total construction cost of 113 billion yen for the Stage II section of highway including the bridge.^[3]

You can help expand this article with text translated from the corresponding article in Japanese. (February 2012) Click [show] for important translation instructions.

View a machine-translated version of the Japanese article.
Machine translation, like DeepL or Google Translate, is a useful starting point for translations, but translators must revise errors as necessary and confirm that the translation is accurate, rather than simply copy-pasting machine-translated text into the English Wikipedia.
Do not translate text that appears unreliable or low-quality. If possible, verify the text with references provided in the foreign-language article.
You must provide copyright attribution in the edit summary accompanying your translation by providing an interlanguage link to the source of your translation. A model attribution edit summary is Content in this edit is translated from the existing Japanese Wikipedia article at [[:ja:東京ゲートブリッジ]]; see its history for attribution.
You may also add the template {{Translated|ja|東京ゲートブリッジ}} to the talk page.
For more guidance, see Wikipedia:Translation.

Quick Facts Tokyo Gate Bridge 東京ゲートブリッジ, Coordinates ...

Tokyo Gate Bridge 東京ゲートブリッジ
Tokyo Gate Bridge, January 2015
Coordinates	35°36′41″N 139°49′38″E
Carries	Road traffic (4 lanes), pedestrians
Crosses	Tokyo Bay
Locale	Kōtō City (Tokyo, Japan), between Chubo and Wakasu artificial islands)
Characteristics
Design	cantilever bridge
Total length	2,618 metres (8,589 ft) including approaches
Width	21 metres (69 ft)
Height	87.8 metres (288 ft)
Longest span	440 metres (1,440 ft)
No. of spans	3
Clearance below	54.6 metres (179 ft)
History
Construction start	2002
Construction end	2011
Opened	2012
Statistics
Toll	None
Location

History

Part of a new four-lane highway ringing Tokyo, construction began in 2002 and was scheduled for completion in 2011, but the opening to traffic was delayed until 2012. With the provisional name of Tokyo Bay Waterfront Bridge (東京港臨海大橋, Tōkyōwan Rinkai Ōhashi)^[4] the public was asked for suggestions. From the 12,223 received, "Tokyo Gate Bridge" was chosen and officially announced on 15 November 2010.^[5]

Remove ads

Design

The design fulfils the requirement to be high enough to allow large ships to pass underneath, but low enough not to interfere with air traffic to the nearby Haneda Airport. It is a double cantilever bridge, which means that the truss sections from either side can be completed in balance, and then joined by the addition of the relatively short central span.^[6] The resemblance of the bridge to two monsters facing off has given it the nickname of 'Dinosaur Bridge' (恐竜橋, Kyōryū-bashi)^[7]

Remove ads

Others

Visitors can take an elevator to the sidewalk on this bridge and walk on the sidewalk from Wakasu to Central Breakwater. But, you can only take an elevator to the sidewalk and the ground from Wakasu Gate, because Central Breakwater Gate is closed, so you cannot take an elevator to sidewalk and ground from Central Breakwater.

If you want to only see the bridge, you go to Wakasu Seaside Park and Central Breakwater.

Remove ads

Access

The bridge can be accessed using the Wakasu Seaside Park Bus stop which 木31 - Shin-Kiba Station（Toei Bus passes through. The Central Breakwater Bus stop can also be used, which 波01 - Tokyo Teleport Station（Toei Bus）passes through. ※From Central Breakwater gate you cannot walk on the bridge.

Tokyo Gate Bridge

History

Design

Gallery

Others

Access

References

External links

Wikiwand - on