Top Qs
Timeline
Chat
Perspective

Ultimate load

From Wikipedia, the free encyclopedia

Remove ads

In engineering, the ultimate load[1] is a statistical figure used in calculations, and should (hopefully) never actually occur. It is used for instance in aerospace engineering, bridge and tunnel construction. This is also commonly used in knowing the properties of metal beams. For example, it is used in experiments such as tensile testing machine (TTM)[clarification needed] and universal testing machine (UTM).

Remove ads

Relation to safety factor and limit load

Strength requirements are specified in terms of limit loads (the maximum loads to be expected in service) and ultimate loads (limit loads multiplied by prescribed factors of safety).

Mathematically, their relation can be expressed as: , where:

  • Bu is the ultimate load
  • Bl is the limit load
  • j is the factor of safety
Remove ads

Aircraft design

With respect to aircraft structure and design, ultimate load is the amount of load applied to a component beyond which the component will fail. The chance that it will occur is, however, not zero, and, if it were to occur, then the relevant structure in the aircraft would stand a large chance of fracture.

During the testing for determination of the loads, no fracture must occur at the ultimate load for a period of 3 seconds.

Remove ads

See also

References

Loading related searches...

Wikiwand - on

Seamless Wikipedia browsing. On steroids.

Remove ads