Top Qs
Timeline
Chat
Perspective

Weissach axle

Automotive rear suspension arrangement From Wikipedia, the free encyclopedia

Weissach axle
Remove ads

The Weissach axle is a rear suspension arrangement first used in 1978 in the Porsche 928 and echoed in subsequent production models.[1] The goal of the initial Weissach axle design was to eliminate lift-off oversteer by allowing the rear suspension to adjust itself during cornering manoeuvres and handle both longitudinal and lateral forces.[1] A fully developed version was used in the Porsche 911 (993).[1]

Thumb
Porsche 928

It is named after the town of Weissach (German pronunciation: [ˈvaɪsaːx]), where a Porsche research and development centre is based.[2] "Weissach" is also a backronym for Winkel einstellende, selbst stabilisierende Ausgleichs-Charakteristik (angle-adjusting, self-stabilizing equalization characteristic).[1]

Remove ads

Design

The Weissach axle is a variant of the semi-trailing arm suspension design. The tendency of a vehicle to oversteer when decelerating is compounded by the compliant bushings found in most trailing arm suspensions. When the vehicle decelerates, the trailing arms and wheels pivot downwards relative to the chassis. This results in toe out, which makes the vehicle unstable.

In a Weissach axle, the frontmost or outer bushing of each trailing arm is replaced by a short link. When the vehicle decelerates and the trailing arms pivot downwards, the links pull the hubs and cause them to rotate inward slightly; the result is toe in, which adds stability and reduces the risk of oversteer.

Remove ads

Other manufacturers

The rear suspension of the second-generation Mazda RX-7 (FC) uses what Mazda refers to as the Dynamic Tracking Suspension System (DTSS), which also serves to increase stability at higher cornering loads and when braking.[3]

References

Loading related searches...

Wikiwand - on

Seamless Wikipedia browsing. On steroids.

Remove ads