Plaxton President

The Plaxton President is a double-decker body of a bus. It has a low-floor, It was made from 1998 to 2005 by Plaxton and then Transbus International and then Alexander Dennis.

Plaxton President
Arriva North West Dennis Trident 2 with Plaxton President bodywork in 2010
Overview
Manufacturer	Plaxton/TransBus/Alexander Dennis
Production	1998–2005
Assembly	Wigan, England
Body and chassis
Doors	1 or 2
Floor type	Low floor
Chassis	Dennis Trident 2 Volvo B7TL VDL DB250
Powertrain
Engine	Cummins C Series/ISCe (Dennis Trident 2) Volvo D7C (Volvo B7TL) DAF (VDL DB250)
Transmission	Voith DIWA/ZF Ecomat
Dimensions
Length	9.9–11.5 m (32 ft 6 in – 37 ft 9 in)
Width	2.55 m (8 ft 4 in)
Height	4.2–4.4 m (13 ft 9 in – 14 ft 5 in)
Chronology
Predecessor	Northern Counties Palatine

The President body was built on the Dennis Trident 2 chassis,^[1] Volvo B7TL chassis,^[2] and the DAF DB250 chassis.^[3]

Gallery

• 
  Brookes Bus Dennis Trident 2 with Plaxton President bodywork
• 
  Volvo B7TL Go North East Volvo B7TL with Plaxton President bodywork
• 
  Brighton & Hove DAF DB250LF with Plaxton President bodywork
• 
  Go-Ahead London DAF DB250LF with Plaxton President bodywork with double doors (doors in the middle)
• 
  First Devon & Cornwall Dennis Trident 2 with Plaxton President bodywork rear
• 
  Uno Dennis Trident 2 with Plaxton President bodywork rear