Braceville Airport

Braceville Airport (FAA LID: 41N) is a public use airport in Trumbull County, Ohio, United States. It is located two miles north of the town of Newton Falls, Ohio.^[2]

Braceville Airport
Braceville Airport from the air, September 2024
IATA: none ICAO: none FAA LID: 41N
Summary
Airport type	Privately owned, publicly used
Owner	Braceville Airport LLC
Serves	Youngstown, Ohio
Location	Newton Falls, Ohio
Elevation AMSL	900 ft / 274 m
Coordinates	41°12′40″N 080°58′09″W
Runways
Direction Length Surface ft m 01/19 3,000 915 Asphalt
Source: Federal Aviation Administration[1]

Braceville Airport was originally certified as an airport in 1969. It is at an elevation of approximately 900 feet above mean sea level.

Facilities and aircraft

The Braceville Airport has one runway: 01/19 which is 3,000 by 30 feet with an asphalt pavement. As of 2025, the runway is in poor condition.^[3]

The airport does not have a fixed-base operator, and no fuel is available.^[4]

There are 7 aircraft based at the Braceville Airport, all single engine airplanes.^[5]

Accidents and incidents

• On September 4, 2021, an ultralight aircraft crashed while operating at the Braceville Airport.^[6][7]

See also

• Lansdowne Airport
• Salem Airpark
• List of airports in Ohio
• Youngstown Elser Metro Airport
• Youngstown Executive Airport
• Youngstown-Warren Regional Airport