Файл:HarmonicDriveAni.gif
Материал из Википедии — свободной encyclopedia
Размер этого предпросмотра: 600 × 600 пкс. Другие разрешения: 240 × 240 пкс | 480 × 480 пкс | 700 × 700 пкс.
Исходный файл (700 × 700 пкс, размер файла: 2,36 МБ, MIME-тип: image/gif, закольцованный, 100 фреймов, 3,0 с)
Этот файл находится на Викискладе. Сведения о нём показаны ниже.
Викисклад — централизованное хранилище для свободных файлов, используемых в проектах Викимедиа.
Сообщить об ошибке с файлом |
Краткое описание
ОписаниеHarmonicDriveAni.gif |
English: Harmonic-Drive Animation (strain wave gear (SWG)). (Colors in the drawing correspond to the Cross section File:Harmonic drive cross Legend.svg.)
Ncircular_spline = 42 (blue); Nflex_spline= 42-2 = 40 (red); Ratio = 40/(42-40) = 20 Deutsch: Harmonic-Drive Animation (Spannungswellengetriebe, Wellgetriebe oder Gleitkeilgetriebe). (Die Farbkodierung entspricht der Schnittzeichnung File:Harmonic drive cross Legend.svg.) zInnenverzahnung = 42 (blue); zFlexspline= 42-2 = 40 (red); i = 40/(42-40) = 20 |
Дата | |
Источник | Собственная работа |
Автор | Jahobr |
GIF‑разработка InfoField | |
Исходный код InfoField | MATLAB codefunction HarmonicDriveAni()
% source code for drawing a HarmonicDrive
% this is by no means a "simulation". It is a hack job that produces a gif
%
% 2016-12-05 Jahobr (reworked 2017-09-16)
nTeethOutGear = 42;
nTeethFlex = nTeethOutGear-2;
modul = 0.1; % modul
colEdge = [0 0 0 ]; % Edge color
colFlex = [1 0.2 0.2]; % FlexSpline color
colWave = [0.1 0.7 0.1]; % WaveGen color
colGear = [0.2 0.2 1 ]; % static OuterGear color
nFrames = 100;
frameAngles = linspace(0,-pi,nFrames+1); % rotate clockwise
frameAngles = frameAngles(1:end-1); % delete redundant frame
[pathstr,fname] = fileparts(which(mfilename)); % save files under the same name and at file location
figHandle = figure(15674454);
clf
axesHandle = axes;
hold(axesHandle,'on')
axis equal
xlim([-3 3])
ylim([-3 3])
set(figHandle, 'Units','pixel');
set(figHandle, 'position',[1 1 700 700]); % [x y width height]
set(axesHandle, 'position',[-0.05 -0.05 1.1 1.1]); % stretch axis bigger as figure, easy way to get rid of ticks [x y width height]
set(figHandle,'GraphicsSmoothing','on') % requires at least version 2014b
for iFrame = 1:nFrames
angleWaveGen = frameAngles(iFrame);
angleFlexTeeth = angleWaveGen*(nTeethFlex-nTeethOutGear)/nTeethFlex; % angle of the flexspline
cla(axesHandle);
%% %%%%%%%% draw OuterGear (static) %%%%%%%%
%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
effectiveDiameter = modul*nTeethOutGear;
toothTipDiameter = effectiveDiameter-1.4*modul;
toothBottomDiameter = effectiveDiameter+1.6*modul;
angleBetweenTeeth = 2*pi/nTeethOutGear; % angle between 2 teeth
angleOffPoints = (0:angleBetweenTeeth/8:(2*pi));
%% outerEdge
maxDiameter = toothBottomDiameter*1.2; % definition of outer line
maxXY = samplesEllipse(maxDiameter,maxDiameter,500);
patch(maxXY(:,1),maxXY(:,2),colGear,'EdgeColor',colEdge,'LineWidth',0.5) % full outer disc
%% inner teeth
radiusOffPoints = angleOffPoints; % init
radiusOffPoints(1:8:end) = toothBottomDiameter/2; % middle bottom
radiusOffPoints(2:8:end) = toothBottomDiameter/2; % left bottom
radiusOffPoints(3:8:end) = effectiveDiameter/2; % rising edge
radiusOffPoints(4:8:end) = toothTipDiameter/2; % right top
radiusOffPoints(5:8:end) = toothTipDiameter/2; % middle top
radiusOffPoints(6:8:end) = toothTipDiameter/2; % left top
radiusOffPoints(7:8:end) = effectiveDiameter/2; % falling edge
radiusOffPoints(8:8:end) = toothBottomDiameter/2; % right bottom
[X,Y] = pol2cart(angleOffPoints,radiusOffPoints);
patch(X,Y,[1 1 1],'EdgeColor',colEdge,'LineWidth',0.5) % overlay white area for inner teeth
%% %%%%%%%%% draw Flexspline %%%%%%%%%
%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% % deform estimation based on tooth distance (using the circumferences); could be automated!
% U1 = 42*pi % Circumference of OuterGear
% U1 =
% 131.9469
%
% U2 = pi*sqrt(2*((42/2)^2+(0.9022*42/2)^2)) * 42/40 % Circumference of Flexspline * 42/40
% U2 =
% 131.9435
deform = 0.9022;
deformedDiameter = effectiveDiameter*deform; % scale down, but teeth must still have the same distance
rootEffectiveDia = effectiveDiameter-1.6*modul; % fixed offset
rootDeformedDia = deformedDiameter-1.6*modul; % fixed offset
topEffectiveDia = effectiveDiameter+1.4*modul; % fixed offset
topDeformedDia = deformedDiameter+1.4*modul; % fixed offset
% % an equidistant sampled ellipse is needed, to keep the tooth distance constant all the way around
offsetOnCircumference = (-angleWaveGen+angleFlexTeeth)/2/pi; % compensation + own_rotation , normalization to "circumference"
equiEffeXY = equidistantSamplesEllipse(effectiveDiameter,deformedDiameter,nTeethFlex*8, offsetOnCircumference); % points on effective diameter
equiRootXY = equidistantSamplesEllipse(rootEffectiveDia, rootDeformedDia, nTeethFlex*8, offsetOnCircumference); % points with inwards offset
equiOutXY = equidistantSamplesEllipse(topEffectiveDia, topDeformedDia, nTeethFlex*8, offsetOnCircumference); % points with outwards offset
toothXY = equiEffeXY; % intit
toothXY(1:8:end,:) = equiOutXY(1:8:end,:); % middle top I######I
toothXY(2:8:end,:) = equiOutXY(2:8:end,:); % left top I######+
% toothXY(3:8:end) init did it I####/
toothXY(4:8:end,:) = equiRootXY(4:8:end,:); % right bottom I##+
toothXY(5:8:end,:) = equiRootXY(5:8:end,:); % middle bottom I##I
toothXY(6:8:end,:) = equiRootXY(6:8:end,:); % left bottom I##+
% toothXY(7:8:end) init did it I####\
toothXY(8:8:end,:) = equiOutXY(8:8:end,:); % right top I######+
[toothXY] = rotateCordiantes(toothXY,angleWaveGen);
patch(toothXY(:,1),toothXY(:,2),colFlex,'EdgeColor',colEdge,'LineWidth',0.5) %draw flexspline with teeth
%% hole
holeEffectiveDia = effectiveDiameter-5*modul; % fixed inwards offset
holeDeformedDia = deformedDiameter-5*modul; % fixed inwards offset
holePathXY = samplesEllipse(holeEffectiveDia,holeDeformedDia,500);
holePathXY = rotateCordiantes(holePathXY,angleWaveGen);
patch(holePathXY(:,1),holePathXY(:,2),[1 1 1],'EdgeColor',colEdge,'LineWidth',0.5) % draw hole of deformed ring
%% %%%%%%%%% draw wave generator %%%%%%%%%
%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
waveEffectiveDia = holeEffectiveDia; % touch flex spline
waveDeformedDia = holeDeformedDia-5*modul; % extra air gap to spline, to make it more obvious
wavePathXY = samplesEllipse(waveEffectiveDia,waveDeformedDia,500);
[wavePathXY] = rotateCordiantes(wavePathXY,angleWaveGen);
patch(wavePathXY(:,1),wavePathXY(:,2),colWave,'EdgeColor',colEdge,'LineWidth',0.5) % draw wave generator
%% central shaft
shaftPathXY = samplesEllipse(effectiveDiameter/2.5,effectiveDiameter/2.5,500);
plot(axesHandle,shaftPathXY(:,1),shaftPathXY(:,2),'LineWidth',0.8,'color',colEdge); % draw central shaft outline
%% %%%%%%%%% save animation %%%%%%%%%
%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
drawnow;
f = getframe(figHandle);
if iFrame == 1 % create colormap
[im,map] = rgb2ind(f.cdata,32,'nodither'); % 32 colors % create color map %% THE FIRST FRAME MUST INCLUDE ALL COLORES !!!
% FIX WHITE, rgb2ind sets white to [0.9961 0.9961 0.9961], which is annoying
[~,wIndex] = max(sum(map,2)); % find "white"
map(wIndex,:) = 1; % make it truly white
im(1,1,1,nFrames) = 0; % allocate
if ~isempty(which('plot2svg'))
plot2svg(fullfile(pathstr, [fname '_Frame1.svg']),figHandle) % by Juerg Schwizer
else
disp('plot2svg.m not available; see http://www.zhinst.com/blogs/schwizer/');
end
end
imtemp = rgb2ind(f.cdata,map,'nodither');
im(:,:,1,iFrame) = imtemp;
end
imwrite(im,map,fullfile(pathstr, [fname '.gif']),'DelayTime',1/30,'LoopCount',inf) % save gif
disp([fname '.gif has ' num2str(numel(im)/10^6 ,4) ' Megapixels']) % Category:Animated GIF files exceeding the 50 MP limit
%%% equidistantSamplesEllipse test code
% figure(455467);clf;hold on;
%
% equidistantXY = equidistantSamplesEllipse(1.5,0.5,40,0.1);
% plot(equidistantXY(:,1),equidistantXY(:,2),'bx-')
%
%
% equidistantXY = equidistantSamplesEllipse(2,1,40,1);
% plot(equidistantXY(:,1),equidistantXY(:,2),'bx-')
%
% equidistantXY = equidistantSamplesEllipse(3,2,40,0.5);
% plot(equidistantXY(:,1),equidistantXY(:,2),'bx-')
%
% equidistantXY = equidistantSamplesEllipse(4,3,40,0);
% plot(equidistantXY(:,1),equidistantXY(:,2),'bx-')
% pathXY = samplesEllipse(4,3,41);
% plot(pathXY(1:end-1,1),pathXY(1:end-1,2),'ro-')
%
% plot([4 -4]/2,[0 0],'-k')
function equidistantXY = equidistantSamplesEllipse(diameterH,diameterV,nPoints,offset)
% Inputs:
% diameterH horizontal diameter
% diameterV vertical diameter
% nPoints number of resampled points
% offsetFraction between 0 and 1 in circumference of ellipse
pathXY = samplesEllipse(diameterH,diameterV,1000); % create ellipse
stepLengths = sqrt(sum(diff(pathXY,[],1).^2,2)); % distance between the points
stepLengths = [0; stepLengths]; % add the starting point
cumulativeLen = cumsum(stepLengths); % cumulative sum
circumference = cumulativeLen(end);
finalStepLocs = linspace(0,1, nPoints+1)+offset; % equidistant distribution
finalStepLocs = finalStepLocs(1:end-1); % remove redundant point
finalStepLocs = mod(finalStepLocs,1)*circumference; % unwrap and scale to circumference
equidistantXY = interp1(cumulativeLen, pathXY, finalStepLocs);
function pathXY = samplesEllipse(diameterH,diameterV,nPoints)
% point of ellipse; points start on the right, counterclockwise
% first and last points are the same
%
% Inputs:
% diameterH horizontal diameter
% diameterV vertical diameter
% nPoints number of points
p = linspace(0,2*pi,nPoints)';
pathXY = [cos(p)*diameterH/2 sin(p)*diameterV/2]; % create ellipse
function [xy] = rotateCordiantes(xy,anglee)
% [x1 y1; x2 y2; x3 y3; ...] coordinates to rotate
% anglee angle of rotation in [rad]
rotM = [cos(anglee) -sin(anglee); sin(anglee) cos(anglee)];
xy = (rotM*xy')';
|
Лицензирование
Я, владелец авторских прав на это произведение, добровольно публикую его на условиях следующей лицензии:
Этот файл доступен на условиях Creative Commons CC0 1.0 Универсальной передачи в общественное достояние (Universal Public Domain Dedication). | |
Лица, связанные с работой над этим произведением, решили передать данное произведение в общественное достояние, отказавшись от всех прав на произведение по всему миру в рамках закона об авторских правах (а также связанных и смежных прав), в той степени, которую допускает закон. Вы можете копировать, изменять, распространять, исполнять данное произведение в любых целях, в том числе в коммерческих, без получения на это разрешения автора.
http://creativecommons.org/publicdomain/zero/1.0/deed.enCC0Creative Commons Zero, Public Domain Dedicationfalsefalse |
Элементы, изображённые на этом файле
изображённый объект
У этого свойства есть некоторое значение без элемента в
5 декабря 2016
image/gif
История файла
Нажмите на дату/время, чтобы посмотреть файл, который был загружен в тот момент.
Дата/время | Миниатюра | Размеры | Участник | Примечание | |
---|---|---|---|---|---|
текущий | 14:20, 29 апреля 2023 | 700 × 700 (2,36 МБ) | Jahobr | Reverted to version as of 15:09, 17 November 2020 (UTC) | |
07:55, 30 марта 2023 | 500 × 500 (734 КБ) | Dndnrmn1 | Reverted to version as of 18:48, 14 March 2017 (UTC) | ||
15:09, 17 ноября 2020 | 700 × 700 (2,36 МБ) | Jahobr | Reverted to version as of 20:14, 16 September 2017 (UTC) | ||
21:40, 9 ноября 2020 | 700 × 700 (2,37 МБ) | UserTwoSix | Better color match. | ||
21:36, 9 ноября 2020 | 700 × 700 (2,37 МБ) | UserTwoSix | Color match with other image on gear page. | ||
20:14, 16 сентября 2017 | 700 × 700 (2,36 МБ) | Jahobr | GraphicsSmoothing on; teeth less woblly; more pixel; | ||
18:48, 14 марта 2017 | 500 × 500 (734 КБ) | Jahobr | colores changed; 32 colores instead of 64; central shaft; optimized using "Jasc Animation Shop" | ||
05:12, 5 декабря 2016 | 500 × 500 (1,25 МБ) | Jahobr | {{Information |Description ={{en|1=Harmonic-Drive Animation}} {{de|1=Harmonic-Drive Animation}} |Source ={{own}} |Author =Jahobr |Date =2016-12-05 |Permission = |other_versions = }} |
Использование файла
Следующая страница использует этот файл:
Глобальное использование файла
Данный файл используется в следующих вики:
- Использование в ca.wikipedia.org
- Использование в de.wikipedia.org
- Использование в en.wikipedia.org
- Использование в es.wikipedia.org
- Использование в fr.wikipedia.org
- Использование в hr.wikipedia.org
- Использование в ja.wikipedia.org
- Использование в nl.wikipedia.org
- Использование в uk.wikipedia.org
- Использование в zh.wikipedia.org