Top Qs
Timeline
Chat
Perspective

Ferrari F50

Italian sports car produced by Ferrari from 1995–1997 From Wikipedia, the free encyclopedia

Ferrari F50
Remove ads

The Ferrari F50 (Type F130) is a limited production mid-engine sports car manufactured by Italian automobile manufacturer Ferrari from 1995 until 1997. Introduced in 1995, the car is a two-door, two seat targa top. The F50 is powered by a 4.7 L naturally aspirated Tipo F130B 60-valve V12 engine that was developed from the 3.5 L V12 used in the 1990 Ferrari 641 Formula One car. The car's design is an evolution of the 1989 Ferrari Mythos concept car, while Pininfarina incorporated design cues from contemporary F1 racecar designs, particularly at the front.[7][8]

Quick Facts Overview, Manufacturer ...

A total of 349 cars were made, with the last car rolling off the production line in July 1997.[1] The F50's engine predated the car; it was used in the Ferrari 333 SP for the American IMSA GT Championship in 1994, allowing it to become eligible for the stock engine World Sports Car category.

Remove ads

Specifications

Thumb
Rear view

Dimensions

Thumb
Ferrari F50 at the Marconi Automotive Museum

Engine

Thumb
The 4.7-litre Tipo F130 B V12 engine

Fuel consumption

  • EPA premium gasoline[10]
    • Combined 8 miles per U.S. gallon (29 L/100 km; 9.6 mpgimp)
    • City 7 miles per U.S. gallon (34 L/100 km; 8.4 mpgimp)
    • Highway 10 miles per U.S. gallon (24 L/100 km; 12 mpgimp)

Transmission

  • Configuration: longitudinal 6-speed manual + reverse, limited-slip differential, RWD
  • Gear ratios: 2.933:1 (1st), 2.157:1 (2nd), 1.681:1 (3rd), 1.360:1 (4th), 1.107:1 (5th), 0.903:1 (6th), 2.529:1 (reverse)
  • Final drive: 3.70:1
    • Final drive assembly: aluminum sand casting
    • Remaining gearset housing: magnesium sand casting
    • Support bracing: steel
  • Flywheel: steel
  • Clutch: dry, twin plate
  • Cooling: oil-water intercooler between gearbox lubricant and engine

Chassis

  • Type: central carbon fiber tub, light-alloy suspension and engine-gearbox assembly mounting points co-polymerised to the chassis
  • Materials: carbon fiber, epoxy resin, Nomex honeycomb structure core, sandwich construction
  • Torsional stiffness: 34,570 N⋅m (25,500 lb⋅ft) per degree

Suspension

  • Front: Rose-jointed unequal-length wishbones, push-rods, coil springs, Bilstein gas-pressurised monotube dampers, electronic adaptive damping, electronic height adjustment (40 mm max)
  • Rear: Rose-jointed unequal-length wishbones, push-rods, coil springs, Bilstein gas-pressurised monotube dampers, electronic adaptive damping, mounting points on a spacer between the engine and gearbox
  • Travel: 55 mm bump, 60 mm rebound
  • Camber angle: -0.7 degrees front, -1.0 degrees rear
  • Anti-roll bars: front and rear
  • Max. roll angle: 1.5 degrees
  • Electronic adaptive damping (based on steering wheel angle and velocity, the body's vertical and longitudinal acceleration, brake line pressure, and vehicle speed)
  • Maximum reaction time (from minimum to maximum damping force or vice versa): 140 milliseconds (0.14 s)
  • Average reaction time (from minimum to maximum damping force or vice versa): 25 to 30 milliseconds (0.025 to 0.03 s)

Steering

Wheels/tires/brakes

  • Wheels: magnesium alloy, manufactured by Speedline
  • Hubs: titanium
  • Disc brake bells/suspension uprights/brake calipers: aluminum
  • Upper and lower wishbones: black powder-coated steel
  • Front wheels: 8.5 in × 18 in (220 mm × 460 mm)
  • Front tires: 245/35ZR-18 Goodyear Eagle F1 GS Fiorano @ 35 psi (240 kPa)
  • Front brakes: Brembo cross-drilled & ventilated cast iron discs, 4 piston aluminum Brembo calipers, Pagid brake pads, (without ABS)
  • Rear wheels: 13 in × 18 in (330 mm × 460 mm)[9]
  • Rear tires: 335/30ZR-18 Goodyear Eagle F1 GS Fiorano @ 30 psi (210 kPa)
  • Rear brakes: Brembo cross-drilled & ventilated cast iron discs, 4 piston aluminum Brembo calipers, Pagid brake pads, (without ABS)
  • Unsprung mass: 99 lb/121 lb (front corners/rear corners)

Colour popularity

  • Rosso Corsa (red): 302
  • Giallo Modena (yellow): 31
  • Rosso Barchetta (dark red): 8
  • Argento Nurburgring (silver): 4
  • Nero Daytona (black): 4
Remove ads

Performance

  • 0–97 km/h (60 mph): 3.8 seconds[6]
  • 0–160 km/h (100 mph): 8.5 seconds[11]
  • 1/4 mile: 12.1 seconds at 198 km/h (123 mph)[6]
  • Skidpad: 0.95 g[6]
  • Braking 70–0 mph (113–0 km/h): 176 ft (54 m)[6]
  • Top speed: 205 mph/328 kp/h

Track tests

The F50 had the following track times:

Remove ads

Ferrari F50 GT

Thumb
Chassis #001 (rear view)

Ferrari developed the F50 based F50 GT in collaboration with its racing partners Dallara and Michelotto to compete in GT1-class racing, following the motorsport theme of the Ferrari F40 LM. Notable changes made to the car include a fixed roof, a large rear spoiler, new front spoiler, adjustable suspension system, Speedline racing alloy wheels with racing slicks and large rear diffusers. The 4.7-litre V12 engine in the F50 GT was tuned-up to generate a power output of around 551 kW (749 PS; 739 hp) at 10,500 rpm. A test was held in 1996 which proved the car to be quicker than even the 333SP, but this went unnoticed as Ferrari cancelled the F50 GT project due to entry of purpose built racing cars in competition such as the Porsche 911 GT1 and due to lack of funding, instead focusing on Formula One after the BPR Global GT Series folded. Only 3 examples were ever built, with the three remaining tubs reportedly destroyed.[15][16]

References

Loading related searches...

Wikiwand - on

Seamless Wikipedia browsing. On steroids.

Remove ads